SKF Nitrile Rubber (NBR) Seal, 30 mm ID, 52 mm OD, 7 mm
- RS 제품 번호:
- 267-3389
- 제조사 부품 번호:
- 30X52X7 HMS5 RG
- 제조업체:
- SKF
Subtotal (1 pack of 10 units)*
₩26,884.00
재고있음
- 추가로 2026년 3월 23일 부터 70 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩2,688.40 | ₩26,876.48 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 267-3389
- 제조사 부품 번호:
- 30X52X7 HMS5 RG
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Seal | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 7mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Seal | ||
Seal Type Rotary Shaft Seal | ||
Thickness 7mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Seal, 30mm Inside Diameter, 52mm Outside Diameter - 30X52X7 HMS5 RG
This seal is a rotary shaft sealing element designed to separate rotating and stationary components and retain oil or grease within assemblies. It features a rubber outer diameter and a single elastomeric sealing lip fitted with a garter spring to maintain radial contact, making it suitable for rotating shafts in industrial equipment.
Features & Benefits
• Nitrile rubber lip provides compatible resistance to oils and greases
• Garter spring maintains a consistent radial load during rotation
• Handles circumferential speed up to 5.77 m/s for moderate-speed shafts
• Operates between −40°C to 100°C for a broad temperature range
• Withstands short-term peaks to 120°C for transient thermal events
• Garter spring maintains a consistent radial load during rotation
• Handles circumferential speed up to 5.77 m/s for moderate-speed shafts
• Operates between −40°C to 100°C for a broad temperature range
• Withstands short-term peaks to 120°C for transient thermal events
Applications
• Suitable for Seals in motors and pumps requiring oil retention
• Ideal for rotating shafts in automation equipment
• Used in gearboxes where grease containment is required
• Can be used for shaft interfaces in electrical actuators
• Ideal for rotating shafts in automation equipment
• Used in gearboxes where grease containment is required
• Can be used for shaft interfaces in electrical actuators
What shaft sizes will this component accept?
It is engineered to fit a 30mm shaft diameter and locate in a 52mm housing bore with a 7mm axial width.
How does it cope with shaft misalignment or eccentricity?
The elastomer lip and flexible rubber outer diameter permit some misalignment accommodation while the spring preserves sealing contact.
What rotational speed limits should be observed?
Maximum recommended rotational speed is 3,660 r/min to avoid exceeding the stated circumferential speed limit.
Can it be used where slight pressure differentials exist?
It tolerates a nominal pressure differential of 0.03 N/mm across the seal interface.
Are any complementary items suggested for installation?
A thin protective sleeve, such as a Speedi-Sleeve, may be used where shaft wear or grooves are present to aid correct seating.
관련된 링크들
- SKF Nitrile Rubber (NBR) Seal, 30 mm ID, 52 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 30 mm ID, 52 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 35 mm ID, 52 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 36 mm ID, 52 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 28 mm ID, 52 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 20 mm ID, 52 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 38 mm ID, 52 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 32 mm ID, 52 mm OD, 7 mm