SKF Nitrile Rubber (NBR) Radial Shaft Seal, 30 mm ID, 50 mm OD, 10 mm

모든 Seals 열람하기

Subtotal (1 pack of 10 units)*

₩35,740.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 10월 12일 부터 10 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
10 +₩3,574.00₩35,740.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
267-3380
제조사 부품 번호:
30X50X10 HMS5 RG
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Inside Diameter

30mm

Product Type

Radial Shaft Seal

Outside Diameter

50mm

Seal Type

Rotary Shaft Seal

Thickness

10mm

Seal Material

Nitrile Rubber (NBR)

COO (Country of Origin):
CN

SKF Radial Shaft Seal, 30mm Inside Diameter, 10mm Thickness - 30X50X10 HMS5 RG


This radial shaft seal provides a sealing solution for rotating shafts, preventing fluid leakage and contamination in rotating assemblies. It is constructed from nitrile rubber to serve as a flexible contact element within rotary systems and is suited to installations where a resilient elastomeric Interface is required between a rotating shaft and stationary housing.

Features and Benefits:


• Nitrile rubber material gives resistance to common oils and fuels
• Rotary configuration maintains continuous contact during shaft rotation
• 10mm cross-section offers consistent axial sealing force
• 30mm inside diameter enables direct fit to small bore shafts
• 50mm outside diameter allows secure press-fit into housings

Applications


• Suitable for sealing small electric motor shafts
• Used with gearboxes requiring oil retention
• Ideal for pumps handling lubricated fluids
• Can be used for industrial rotating equipment maintenance
• Applicable to agricultural machinery with rotating components

What elastomer is used for the lip to resist lubricants?


The sealing lip is MADE from nitrile rubber which provides compatibility with many oils and lubricants.

Which shaft bore size should it be mounted on?


It is designed to fit shafts with a 30mm bore diameter.

How is the seal retained within the housing?


The outer diameter is 50mm to enable a press-fit into an appropriately sized housing bore.

What thickness does the sealing element present for axial engagement?


The cross-sectional thickness is 10mm, providing the axial sealing interface.

Can it operate on rotating shafts rather than stationary seals?


Yes, it is intended for rotary shaft applications where the seal lip remains in contact during rotation.

관련된 링크들