SKF Polytetrafluoroethylene Seal, 74.5 mm ID, 90 mm OD, 6.3 mm
- RS 제품 번호:
- 267-0438
- 제조사 부품 번호:
- GH 90X74.5X6.3-AD1
- 제조업체:
- SKF
Subtotal (1 pack of 5 units)*
₩288,620.00
재고있음
- 5 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 5 + | ₩57,724.00 | ₩288,620.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 267-0438
- 제조사 부품 번호:
- GH 90X74.5X6.3-AD1
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 74.5mm | |
| Product Type | Seal | |
| Outside Diameter | 90mm | |
| Seal Type | Hydraulic Seal | |
| Thickness | 6.3mm | |
| Seal Material | Polytetrafluoroethylene | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 74.5mm | ||
Product Type Seal | ||
Outside Diameter 90mm | ||
Seal Type Hydraulic Seal | ||
Thickness 6.3mm | ||
Seal Material Polytetrafluoroethylene | ||
- COO (Country of Origin):
- CN
SKF Seal, 6.3mm Thickness, 74.5mm Inside Diameter - GH 90X74.5X6.3-AD1
This seal is a hydraulic sealing element manufactured from polytetrafluoroethylene for use in fluid power systems. It is intended to provide a low-friction barrier between moving components within hydraulic assemblies and maintain fluid containment under operating conditions.
Features and Benefits:
• Low-friction polymer reduces wear on mating surfaces
• Chemical-resistant material maintains performance in aggressive fluids
• Consistent cross-section supports stable dynamic sealing behaviour
• Durable construction extends service intervals in hydraulic circuits
• Chemical-resistant material maintains performance in aggressive fluids
• Consistent cross-section supports stable dynamic sealing behaviour
• Durable construction extends service intervals in hydraulic circuits
Applications
• Suitable for rod and piston sealing in hydraulic cylinders
• Used with reciprocating hydraulic actuators in industrial systems
• Ideal for refurbishment of hydraulic components in maintenance work
• Can be used for replacement Seals in mobile hydraulics
• Used with reciprocating hydraulic actuators in industrial systems
• Ideal for refurbishment of hydraulic components in maintenance work
• Can be used for replacement Seals in mobile hydraulics
What material properties affect compatibility with hydraulic fluids?
The component is moulded from polytetrafluoroethylene, which offers high chemical inertness and low wettability suitable for a wide range of hydraulic media.
How should the seal be referenced when selecting a replacement?
Match the inner and outer diameters and thickness specified to ensure correct fit within the gland and mating hardware.
What physical dimensions determine fitment in a cylinder gland?
The critical dimensions are the internal diameter, external diameter and radial thickness which set clearance and compression in the gland.
How does the seal’s thickness influence installation tolerances?
The 6.3 mm radial thickness dictates the compression allowance and influences the groove depth required for correct sealing performance.
관련된 링크들
- SKF Polytetrafluoroethylene Seal, 64.5 mm ID, 80 mm OD, 6.3 mm
- SKF Polytetrafluoroethylene Seal, 29 mm ID, 40 mm OD, 4.2 mm
- SKF Polytetrafluoroethylene Seal, 39 mm ID, 50 mm OD, 4.2 mm
- SKF Polyamide Seal, 74.5 mm ID, 90 mm OD, 6.3 mm
- SKF Nitrile Rubber (NBR) Seal, 84.5 mm ID, 100 mm OD, 6.3 mm
- SKF Nitrile Rubber (NBR) Seal, 52 mm ID, 63 mm OD, 4.2 mm
- SKF Polyurethane Seal, 69 mm ID, 90 mm OD, 8.1 mm
- SKF Polyamide Seal, 69 mm ID, 90 mm OD, 8.1 mm