SKF Nitrile Rubber (NBR) Seal, 50 mm ID, 72 mm OD, 10 mm
- RS 제품 번호:
- 267-0318
- 제조사 부품 번호:
- 50X72X10 HMS5 RG
- 제조업체:
- SKF
Subtotal (1 pack of 10 units)*
₩40,911.00
재고있음
- 30 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩4,091.10 | ₩40,911.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 267-0318
- 제조사 부품 번호:
- 50X72X10 HMS5 RG
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Seal | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 10mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Seal | ||
Seal Type Rotary Shaft Seal | ||
Thickness 10mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Seal, 50mm Inside Diameter, 72mm Outside Diameter - 50X72X10 HMS5 RG
This seal is a rotary shaft sealing component designed to separate rotating and stationary parts and retain lubricants in assemblies where relative motion occurs. It features an elastomeric sealing lip with a rubber outside diameter, intended for use with oil or grease in industrial machinery.
Features & Benefits
• Nitrile rubber lip provides chemical resistance and oil compatibility
• Garter spring maintains radial load for consistent sealing
• Rubber outside diameter allows press-fit into housing bores
• Operates up to 100°C continuous temperature capability
• Supports circumferential speeds up to 7.8 m/s for moderate-speed shafts
• Garter spring maintains radial load for consistent sealing
• Rubber outside diameter allows press-fit into housing bores
• Operates up to 100°C continuous temperature capability
• Supports circumferential speeds up to 7.8 m/s for moderate-speed shafts
**Applications**
• Suitable for bearing housings in automation equipment
• Ideal for gearboxes requiring oil retention
• Used with motor shafts in electrical drive systems
• Can be used for shafts in production-line mechanical assemblies
• Ideal for gearboxes requiring oil retention
• Used with motor shafts in electrical drive systems
• Can be used for shafts in production-line mechanical assemblies
What shaft diameters can it be fitted to?
It is intended for shafts with a 50 mm diameter, matching the shaft Interface for proper lip contact.
What are the short-term temperature limits for heavy-duty cycles?
Short-duration exposure is permitted up to 120°C for intermittent high-temperature events.
How does it cope with misalignment between components?
The sealing lip and spring arrangement accommodate minor radial and angular misalignment without loss of sealing function.
What rotational speed can it handle safely?
The design supports rotational speeds up to 3,000 rpm under specified installation and lubrication conditions.
관련된 링크들
- SKF Nitrile Rubber (NBR) Seal, 50 mm ID, 72 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal, 50 mm ID, 72 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 45 mm ID, 72 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 48 mm ID, 72 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 30 mm ID, 72 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 52 mm ID, 72 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 42 mm ID, 72 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 40 mm ID, 72 mm OD, 10 mm