SKF Flouro Rubber Seal, 45 mm ID, 48 mm OD, 13 mm
- RS 제품 번호:
- 267-0297
- 제조사 부품 번호:
- 50 VS V
- 제조업체:
- SKF
Subtotal (1 unit)*
₩37,064.00
재고있음
- 추가로 2026년 10월 12일 부터 5 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩37,064.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 267-0297
- 제조사 부품 번호:
- 50 VS V
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 45mm | |
| Product Type | Seal | |
| Outside Diameter | 48mm | |
| Seal Type | V Seal | |
| Thickness | 13mm | |
| Seal Material | Flouro Rubber | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 45mm | ||
Product Type Seal | ||
Outside Diameter 48mm | ||
Seal Type V Seal | ||
Thickness 13mm | ||
Seal Material Flouro Rubber | ||
- COO (Country of Origin):
- IT
SKF Seal, 13mm Thickness, 45mm Inside Diameter - 50 VS V
This seal is a V-shaped sealing element designed for dynamic shaft applications, providing fluid containment and exclusion in rotating assemblies. It is manufactured from a fluorine-based elastomer to perform in settings requiring resistance to aggressive media and elevated temperatures, and is intended to fit tightly within a V-groove profile for axial sealing.
Features and Benefits:
• Fluoro-rubber construction gives enhanced chemical resistance
• V-profile form reduces axial leakage in rotating shafts
• Designed for high-temperature service where heat tolerance is required
• Compressible lip geometry supports sustained sealing contact
• Low-friction material aids reduced wear during rotation
• V-profile form reduces axial leakage in rotating shafts
• Designed for high-temperature service where heat tolerance is required
• Compressible lip geometry supports sustained sealing contact
• Low-friction material aids reduced wear during rotation
Applications
• Suitable for sealing shafts in hydraulic equipment
• Ideal for use in pumps handling aggressive fluids
• Used with rotary shafts exposed to high temperatures
• Can be used for retrofitting V-groove seal assemblies
• Suitable for industrial machinery requiring chemical resistance
• Ideal for use in pumps handling aggressive fluids
• Used with rotary shafts exposed to high temperatures
• Can be used for retrofitting V-groove seal assemblies
• Suitable for industrial machinery requiring chemical resistance
What are the key material characteristics relevant to aggressive media?
The component is MADE from a fluorine-containing elastomer selected for resistance to a wide range of chemicals and fuels.
How does the seal manage heat during continuous operation?
The elastomer formulation is intended to withstand elevated service temperatures, maintaining elasticity and sealing contact under thermal stress.
What design aspect minimises leakage on rotating shafts?
The V-shaped cross-section allows axial lip engagement that compensates for shaft movement and maintains a fluid-tight interface.
How should the sealing element be positioned in the shaft assembly?
It should be installed into a matching V-groove so the lips compress against the shaft to form the sealing interface.
What operational behaviour affects wear rate?
Friction between the seal lips and the rotating surface determines wear, so lubrication and shaft finish will influence service life.
관련된 링크들
- SKF Flouro Rubber Seal, 40 mm ID, 43 mm OD, 13 mm
- SKF Flouro Rubber Seal, 54 mm ID, 58 mm OD, 13 mm
- SKF Flouro Rubber Seal, 36 mm ID, 38 mm OD, 13 mm
- SKF Flouro Rubber Seal, 99 mm ID, 105 mm OD, 18 mm
- SKF Flouro Rubber Seal, 125 mm ID, 117 mm OD, 18 mm
- SKF Flouro Rubber Seal, 18 mm ID, 19 mm OD, 10.5 mm
- SKF Flouro Rubber Seal, 72 mm ID, 78 mm OD, 15.5 mm
- SKF Flouro Rubber Seal, 63 mm ID, 68 mm OD, 15.5 mm