SKF Nitrile Rubber (NBR) Radial Shaft Seal, 45 mm ID, 72 mm OD, 10 mm
- RS 제품 번호:
- 267-0259
- 제조사 부품 번호:
- 45X72X10 HMSA10 RG
- 제조업체:
- SKF
Subtotal (1 pack of 10 units)*
₩51,840.00
재고있음
- 10 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩5,184.00 | ₩51,840.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 267-0259
- 제조사 부품 번호:
- 45X72X10 HMSA10 RG
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 45mm | |
| Product Type | Radial Shaft Seal | |
| Outside Diameter | 72mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 10mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 45mm | ||
Product Type Radial Shaft Seal | ||
Outside Diameter 72mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 10mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Radial Shaft Seal, 45mm Inside Diameter, 72mm Outside Diameter - 45X72X10 HMSA10 RG
This radial shaft seal provides a sealing Interface for rotating shafts, designed to prevent fluid leakage and exclude contaminants in industrial rotary assemblies. It is constructed from nitrile rubber and suited for environments requiring a flexible contact seal around a shaft while retaining lubricants and resisting ingress of dirt and debris.
Features and Benefits:
• Nitrile rubber composition offers resistance to mineral oils
• Rotary configuration supports continuous shaft movement
• 10mm wall section sustains contact pressure under load
• Flexible lip design maintains sealing on eccentric shafts
• Elastomeric construction tolerates routine thermal cycling
• Rotary configuration supports continuous shaft movement
• 10mm wall section sustains contact pressure under load
• Flexible lip design maintains sealing on eccentric shafts
• Elastomeric construction tolerates routine thermal cycling
Applications
• Suitable for gearboxes with rotating output shafts
• Used with pumps handling lubricated shafts
• Ideal for electric motor shaft sealing tasks
• Can be used for agricultural machinery drivetrains
• Suitable for general industrial rotating equipment
• Used with pumps handling lubricated shafts
• Ideal for electric motor shaft sealing tasks
• Can be used for agricultural machinery drivetrains
• Suitable for general industrial rotating equipment
What internal clearance is required to fit this seal?
It fits shafts sized for a 45mm internal bore and should be installed on a shaft matching that diameter to ensure correct lip contact.
What external housing bore accommodates the seal?
The housing should accept an outer diameter of 72mm to allow proper interference fit and secure seating of the seal.
How thick is the sealing section and why does it matter?
The radial section is 10mm thick which preserves axial stability and maintains effective contact under side loads.
What material properties affect compatibility with lubricants?
The elastomer is nitrile rubber, which is selected for its compatibility with common mineral-based lubricants and oils.
관련된 링크들
- SKF Nitrile Rubber (NBR) Seal, 45 mm ID, 72 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal, 72 mm ID, 100 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 55 mm ID, 72 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 72 mm ID, 90 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 38 mm ID, 72 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 72 mm ID, 95 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 30 mm ID, 72 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 35 mm ID, 72 mm OD, 10 mm