SKF Nitrile Rubber (NBR) Radial Shaft Seal, 40 mm ID, 58 mm OD, 10 mm

모든 Seals 열람하기

Subtotal (1 pack of 10 units)*

₩37,120.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 20 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
10 +₩3,712.00₩37,120.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
266-9130
제조사 부품 번호:
40X58X10 HMS5 RG
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Product Type

Radial Shaft Seal

Inside Diameter

40mm

Outside Diameter

58mm

Seal Type

Rotary Shaft Seal

Thickness

10mm

Seal Material

Nitrile Rubber (NBR)

COO (Country of Origin):
CN

SKF Radial Shaft Seal, 40mm Inside Diameter, 58mm Outside Diameter - 40X58X10 HMS5 RG


This radial shaft seal provides a sealing solution for rotating shafts in industrial equipment, preventing fluid leakage and excluding contaminants during operation. It is designed for rotary applications where a resilient sealing lip and firm seating are required, and is suitable for installation in housings that accept standard rotary oil seals.

Features and Benefits:


• Nitrile rubber construction resists oil exposure and maintains sealing integrity
• Rotary design enables continuous shaft rotation without leakage
• 10 mm radial thickness offers stable axial retention under load
• Precision internal diameter supports accurate shaft fit and minimal runout
• Compressible outer profile ensures secure seating in housings

Applications


• Suitable for motors requiring NBR radial shaft seal for motors
• Used with gearboxes as a 40x58x10 oil seal replacement
• Ideal for pumps needing rubber rotary shaft seal nitrile performance
• Can be used for bearing covers using 40 mm internal diameter seal NBR
• Used for industrial drives requiring industrial radial shaft Seals 40 mm

What material properties affect compatibility with lubricants?


The seal is MADE from nitrile rubber which offers resistance to many mineral oils and common lubricants, influencing selection based on fluid chemistry.

How should the internal diameter be selected relative to shaft size?


Choose the 40 mm internal diameter to match the shaft nominal diameter for proper interference fit and effective lip contact.

What housing considerations ensure correct outer seating?


The outside diameter must match the bore to allow the 58 mm OD radial seal to SIT squarely and prevent distortion during installation.

How does thickness influence installation and performance?


The 10 mm thickness provides axial stability and helps maintain contact pressure across the sealing lip during shaft rotation.

관련된 링크들