SKF Nitrile Rubber (NBR) Radial Shaft Seal, 17 mm ID, 32 mm OD, 7 mm

모든 Seals 열람하기

Subtotal (1 pack of 10 units)*

₩22,180.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 10월 12일 부터 20 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
10 +₩2,218.00₩22,180.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
266-8987
제조사 부품 번호:
17X32X7 HMS5 RG
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Product Type

Radial Shaft Seal

Inside Diameter

17mm

Outside Diameter

32mm

Seal Type

Rotary Shaft Seal

Thickness

7mm

Seal Material

Nitrile Rubber (NBR)

COO (Country of Origin):
CN

SKF Radial Shaft Seal, 17mm Inside Diameter, 32mm Outside Diameter - 17X32X7 HMS5 RG


This radial shaft seal is a rotary sealing component designed to prevent fluid leakage and exclude contaminants around rotating shafts. It is intended for use in rotary assemblies where a flexible, oil-resistant barrier is required, operating as the Interface between a rotating shaft and stationary housing.

Features and Benefits:


• Nitrile rubber construction provides resistance to oils and greases
• Rotary sealing lip design delivers continuous dynamic sealing performance
• 7mm cross-section supports consistent axial compression control
• Designed for 17mm inner bore to ensure secure shaft fit
• 32mm outer diameter enables firm press-fit into housings

Applications


• Suitable for gearboxes requiring oil containment
• Used with motors featuring 17mm shaft journals
• Ideal for pumps needing rotary lip sealing
• Can be used for maintenance oil seal replacement tasks
• Used for shaft-driven agricultural equipment assemblies

What material composes the flexible sealing element?


The seal is manufactured from nitrile rubber which offers compatibility with common lubricants and hydrocarbons.

How does the seal accommodate shaft fitment?


The internal bore is sized at 17mm to match shaft diameters and facilitate a snug interference fit during installation.

Which housing Interface dimension is required for press fitting?


The external diameter measures 32mm and is intended to be pressed into a corresponding housing bore for retention.

What axial dimension affects compression during installation?


The seal thickness is 7mm, which dictates the amount of axial compression and sealing lip preload when fitted.

Can this seal be sourced for oil-service replacements?


It is available in the specified 17x32x7 form factor for oil-seal replacement applications.

관련된 링크들