SKF Nitrile Rubber (NBR) Radial Shaft Seal, 15 mm ID, 25 mm OD, 5 mm

모든 Seals 열람하기

Subtotal (1 pack of 10 units)*

₩20,380.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 10월 12일 부터 210 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
10 +₩2,038.00₩20,380.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
266-8938
제조사 부품 번호:
15X25X5 HMS5 RG
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Product Type

Radial Shaft Seal

Inside Diameter

15mm

Outside Diameter

25mm

Seal Type

Rotary Shaft Seal

Thickness

5mm

Seal Material

Nitrile Rubber (NBR)

COO (Country of Origin):
CN

SKF Radial Shaft Seal, 15mm Inside Diameter, 25mm Outside Diameter - 15X25X5 HMS5 RG


This radial shaft seal provides a rotating-shaft sealing solution designed to prevent fluid escape and exclude contaminants in rotary assemblies. It is manufactured from nitrile rubber and is intended for installation where a compact, resilient sealing element is required around a spinning shaft.

Features and Benefits:


• Nitrile composition resists common petroleum-based fluids
• Rotary design maintains dynamic sealing under rotation
• Thin cross-section supports Compact housing integration
• Sealing lip geometry delivers consistent contact pressure
• Elastomeric flexibility reduces leakage during shaft misalignment

Applications


• Suitable for small gearbox oil retention tasks
• Used with motor shafts in Compact electromechanical assemblies
• Ideal for pump drives requiring fluid containment
• Can be used for bearing protection against contaminants
• Used for rotary Seals in precision instrumentation

What material compatibility should be expected with common lubricants?


The elastomer is nitrile rubber which is compatible with many petroleum-based lubricants and oils.

How does the seal cope with minor shaft eccentricity during operation?


The flexible rubber construction absorbs small misalignments while maintaining lip contact to limit leakage.

What installation clearance considerations apply for the component?


A press-fit into the housing bore is typical, with radial interference chosen to retain the seal without deforming the sealing lip.

How does the seal behave during intermittent shaft rotation?


The rotary lip sustains repeated start/stop cycles by conforming to the shaft surface and preserving the sealing interface.

관련된 링크들