SKF TPE Seal, 50mm ID, 75.5mm OD, 12.5mm

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Seals 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩31,734.40

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 1월 19일 부터 4 개 단위 배송
  • 추가로 2026년 2월 09일 부터 12 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 5₩31,734.40
6 +₩30,531.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
506-684
제조사 부품 번호:
TSN511L
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Inside Diameter

50mm

Outside Diameter

75.5mm

Seal Type

Four-Lip Seal

Thickness

12.5mm

Seal Material

TPE

제외

COO (Country of Origin):
SE

SKF Double Lip Seal, Type L, Polyurethane Construction - TSN511L


Want to keep your bearing running smoothly with minimum hassle? Use this double-lip seal from SKF to keep contamination firmly locked out. As a Type L seal, it's suitable for use with plummer-block-housed units. For easy compatibility, it measures 255 (L) x 95mm (D) and has an overall height of 128mm, an inside diameter of 50mm and a centre height of 70mm. The 16mm holes for mounting are located 210mm apart (centre to centre), which makes it a precise fit for standard bearings.

Features & Benefits


• Additional dust lip makes it suitable for use in dirty and dusty environments
• Flexible, oil-resistant PU material is hardwearing to give you a long service life
• Suitable for use with shafts rotating at peripheral speeds of up to 13 m/s (2600 ft/min), supporting high-speed applications

Applications


• Flour mills
• Materials handling
• Marine equipment

What's a plummer block?


A plummer block is a pedestal-mounting block that houses a bearing. It holds the outer ring of the bearing still while allowing the inner ring to rotate. When properly installed they can last a long time without needing to be replaced.


Plummer Blocks, Bearing Lubrication and Accessories

관련된 링크들