Infineon 70 V 70 mA Rectifier & Schottky Diode Schottky 2-Pin SC-79 BAS7002VH6327XTSA1

RS 제품 번호:: 249-6983
Distrelec 제품 번호:: 304-40-472
제조사 부품 번호:: BAS7002VH6327XTSA1
제조업체:: Infineon

Infineon 70 V 70 mA Rectifier & Schottky Diode Schottky 2-Pin SC-79 BAS7002VH6327XTSA1

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (10 units, in packs of 10)*

₩3,640.00

일시적 품절

2027년 3월 25일 부터 15,000 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	한팩당*
10 - 10	₩364.00	₩3,640.00
20 - 90	₩330.00	₩3,300.00
100 - 240	₩292.00	₩2,920.00
250 - 490	₩264.00	₩2,640.00
500 +	₩238.00	₩2,380.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 249-6983
Distrelec 제품 번호:: 304-40-472
제조사 부품 번호:: BAS7002VH6327XTSA1
제조업체:: Infineon

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Infineon
	Product Type	Rectifier & Schottky Diode
	Mount Type	Surface
	Package Type	SC-79
	Maximum Continuous Forward Current If	70mA
	Peak Reverse Repetitive Voltage Vrrm	70V
	Series	BAS70
	Diode Configuration	Single
	Rectifier Type	Schottky
	Pin Count	2
	Maximum Forward Voltage Vf	1000mV
	Minimum Operating Temperature	-55°C
	Peak Reverse Current Ir	0.1μA
	Peak Non-Repetitive Forward Surge Current Ifsm	100mA
	Maximum Operating Temperature	125°C
	Standards/Approvals	RoHS
	Width	0.55mm
	Length	1.6mm
	Height	0.8mm
	Automotive Standard	AEC-Q101

	모두 선택
	브랜드 Infineon
	Product Type Rectifier & Schottky Diode
	Mount Type Surface
	Package Type SC-79
	Maximum Continuous Forward Current If 70mA
	Peak Reverse Repetitive Voltage Vrrm 70V
	Series BAS70
	Diode Configuration Single
	Rectifier Type Schottky
	Pin Count 2
	Maximum Forward Voltage Vf 1000mV
	Minimum Operating Temperature -55°C
	Peak Reverse Current Ir 0.1μA
	Peak Non-Repetitive Forward Surge Current Ifsm 100mA
	Maximum Operating Temperature 125°C
	Standards/Approvals RoHS
	Width 0.55mm
	Length 1.6mm
	Height 0.8mm
	Automotive Standard AEC-Q101

Datasheet - BAS7002VH6327XTSA1

Infineon BAS70 Series Rectifier & Schottky Diode, 70V Peak Reverse Repetitive Voltage, 70mA Max Continuous Forward Current - BAS7002VH6327XTSA1

This rectifier & schottky diode is a single‑pack surface‑mount device designed for low‑voltage switching and rectification in constrained electronic assemblies. It operates across a wide thermal range and is manufactured to meet industry environmental restrictions, making it suitable for Compact circuits requiring Rapid recovery and minimal forward drop.

Features and Benefits:

• Low forward voltage 1000mV reduces conduction losses
• Max continuous forward current 70mA supports light signal loads
• Peak reverse repetitive voltage 70V allows moderate reverse blocking
• Peak non rep forward surge current Ifsm100mA tolerates short transients
• Very low reverse leakage 0.1μA minimises standby current
• Qualified to AEC‑Q101 for automotive temperature stresses

Applications

• Suitable for portable power‑management circuits in Compact devices
• Ideal for reverse‑polarity protection in sensor interfaces
• Used with high‑density assemblies requiring SMD rectifiers
• Can be used for clamp and steering diodes in signal paths
• Appropriate for automotive electronics requiring automotive qualification

What temperature extremes can it withstand in operation?

It operates reliably from −55°C up to 125°C.

How many electrical connections does it provide for PCB layout?

It has two terminals for straightforward surface mounting.

What package should I plan for on the board footprint?

The device uses an SC‑79 style SMD outline suitable for small footprints.

Is it compliant with material restriction directives?

The construction conforms to RoHS requirements.

How does it behave under repeated reverse voltage conditions?

It is rated for a Peak reverse repetitive voltage of 70V for repeated blocking use.