Subtotal (1 unit)*
₩1,341,775.50
재고있음
- 6 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩1,341,775.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 492-4972
- 제조사 부품 번호:
- UE401-A0010
- 제조업체:
- SICK
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SICK | |
| Product Type | Safety Relay | |
| Mount Type | Snap-On | |
| Series | UE401 | |
| Power Consumption | 3.6W | |
| Terminal Type | Screw | |
| IP Rating | IP67 | |
| Standards/Approvals | ISO13849-1, EN60947-5-5, EN60947-5-1, ISO13850 | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 55°C | |
| Height | 113.5mm | |
| Length | 66mm | |
| Width | 23mm | |
| Safety Category | PLe Category 4 | |
| Hazardous Area Certification | ATEX, IECEx | |
| Coil Voltage | 24V dc | |
| 모두 선택 | ||
|---|---|---|
브랜드 SICK | ||
Product Type Safety Relay | ||
Mount Type Snap-On | ||
Series UE401 | ||
Power Consumption 3.6W | ||
Terminal Type Screw | ||
IP Rating IP67 | ||
Standards/Approvals ISO13849-1, EN60947-5-5, EN60947-5-1, ISO13850 | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 55°C | ||
Height 113.5mm | ||
Length 66mm | ||
Width 23mm | ||
Safety Category PLe Category 4 | ||
Hazardous Area Certification ATEX, IECEx | ||
Coil Voltage 24V dc | ||
제외
- COO (Country of Origin):
- GB
L4000, Type 4 Single/Multibeam System
The L4000 is a single/multi beam, non contact, safety system using a sender and a receiver arrangement and is certified according to IEC 61496 safety category Type 4.,The system consists of the UE401 controller to which, sender and receivers can be connected. Up to 4 sensor pairs can be connected to the UE401
Applications:
This device is intended for body detection of an operator under normal approach conditions toward a hazardous area
Features:
Easy installation
7 segment display
Integrated alignment aid
Reset and External Device Monitoring
2 OSSD (Output Signal Switching Device) outputs
Short response time 30ms
IP67 sender and receiver
Single Beam Safety Device
Note
Installation and operation of this safety device must be in strict accordance with accompanying operating instruction. Further guidance on the use of Active Opto-electronic Protective Devices (AOPD) is available from Health & Safety Executive guidance note HSG180.
관련된 링크들
- SICK UE410 Series Safety Controller, 24V dc
- Sick Safety Relay, 24V dc
- SICK UE410 Series Safety Controller, 2 Safety Inputs, 2 Safety Outputs, 24V dc
- SICK UE403 Series Input/ Output Module Safety Relay, 24V dc
- SICK UE410 Series Safety Controller, 4 Safety Inputs, 1 Safety Outputs, 24V dc
- SICK UE410 Series Safety Controller, 4 Safety Inputs, 4 Safety Outputs, 24V dc
- SICK UE410 Series Safety Controller, 2 Safety Inputs, 4 Safety Outputs, 24V dc
- Omron G9SE, 24V dc Safety Relay, 4 Safety Contacts, 1