SICK RE300 Safety Interlock Switch, Magnet, ABS, Magnet

This safety interlock switch is a non-contact magnetic device designed to monitor access points and machine guards in industrial settings. It provides a compact, sealed solution for environments where ingress protection and simple actuator coupling are required. The unit operates over a wide ambient temperature range and connects via a fixed cable for straightforward installation into safety circuits that rely on external diagnostics.

• IP67 rating provides dustproof and waterproof protection
• 30mA contact current limits switching load for safety circuits
• Magnetic lock style allows contactless actuation for wear reduction
• Multi-direction head safety interlock supports five approach directions
• ABS housing offers a lightweight enclosure resistant to impact

• Suitable for guarding doors on automated production lines
• Ideal for use where a waterproof safety interlock switch is required
• Used with safety logic units for monitored access control
• Can be used for non-contact detection on packaging machinery
• Suitable for installations operating between -10°C and 55°C

It uses reed contact outputs with one normally open and one normally closed contact.

It is supplied with a 3M PVC cable for direct wiring into safety-related logic units.

The switch lacks internal fault detection so the connected safety logic must perform fault monitoring.

It is rated for vibration at 10Hz to 55Hz with 0.35mm amplitude and shock resistance of 30g.