The Pilz PNOZmulti series is a 20 safety inputs and 6 safety outputs safety controller. This is an innovative device with positiv: guided relay outputs and semiconductor outputs. The safety function remains effective in the case of a component failure. The relay contacts meet the requirements for safe separation through increased insulation. The safety outputs are tested periodically using a disconnection test.
Note Configuration software and pre: license sold separately Call Pilz to register, this activates the software and is used for technical queries and support from Pilz In order to program the controller from your PC, you will need an adaptor and cable
Supplied with Plug: in screw terminals and 32K SIM card
Features and Benefits
E-STOP pushbutton Two: hand button Safety gate limit switch Reset button Light barrier Scanner Enable switch PSEN – operating mode selector switch – safety mat LED indicator for diagnostics, supply voltage, output circuits, and input circuits Circuit is redundant with built: in self: monitoring Max. 8 expansion modules and 1 fieldbus module can be connected Monitors shorts between the safety outputs Plug: in connection terminals (either cage clamp terminal or screw terminal) One system covers both safety: related (E: stop, light curtain etc) and standard control functions Economical non: expandable solution Simple wiring means short commissioning times Simple intuitive programming resulting in time and cost saving Flexible to apply, as only one solution required for applications up to category 4 (EN954: 1) and applications up to SIL 3 (EN61508) Simple, user: friendly diagnostics mean short down: time, and high plant availability Compact design, DIN rail mount
Certifications
UL listed CCC certified BG certified VDE 0113Part 1 EN 60204: 1 GOST R certified TUV certified NFPA 79: 2002
