Encoder, incremental, magnetic, 6mm hub

  • RS 제품 번호 178-3257
  • 제조사 부품 번호 AEAT-601B-F06
  • 제조업체 Broadcom
참조 문서
제정법과 컴플라이언스
COO (Country of Origin): MY
제품 세부 사항

AEAT-601B Incremental Magnetic Encoder

The AEAT-601B is a low-cost rotary quadrature encoder that converts the rotation of a shaft to a series of pulses on 3 digital output channels. A suitable microcontroller can calculate angular position, speed and rotational direction from the two signals in phase quadrature and one-pulse per revolution index channel. The use of magnetic technology for motion control and sensing activities eliminates mechanical contact and enables this device to be free from mechanical wear and tear. The encoder maximum rotational speed is typically only limited by the application bearing speed.

TTL 2-channel quadrature output + index
Resolution: 256 ppr (CPR)
Max rotational speed (mechanical): 12000 rpm
Max rotational speed (electrical): 7000 rpm
Operating temperature range: -40 to +125°C
Supply voltage: +4.5 to +5.5 V
Shaft diameter: 6 mm
Shaft length: 8.5 ±1.0 mm
Applications: Monitoring of shaft speeds, closed-loop (PID) control of DC motors, robots, automation

AEAT-601B - Incremental Magnetic Encoder

• Easy assembly and no signal adjustment required • Resolution of 256 counts per revolution (CPR)
• 3-channel output
• Single 5V supply
• Direct connectivity through cable output
• Wide temperature range from -40 to 125C

Position & Motion Sensors, Avago

Pulses Per Revolution 256
Encoder Technology Incremental
Maximum Revolutions 12000rpm
Output Signal Type Quadrature
Supply Voltage 4.5 → 5.5 V dc
Minimum Operating Temperature -40°C
Maximum Operating Temperature +125°C
1040 <재고있음> 5-9영업일내 홍콩 발송
단가 Each (In a Box of 80)
(exc. VAT)
Per Box*
80 +
*다른 단위에 대한 가격 표시