Telemecanique Sensors XY2-CE Rope Pull Switch 142 mm, Left Side, 1 NO/1 NC
- RS 제품 번호:
- 610-0257
- Distrelec 제품 번호:
- 304-23-867
- 제조사 부품 번호:
- XY2CE2A250
- 제조업체:
- Telemecanique Sensors
Subtotal (1 unit)*
₩502,467.60
제한된 재고
- 추가로 2026년 3월 05일 부터 3 개 단위 배송
- 추가로 2026년 3월 26일 부터 6 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩502,467.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 610-0257
- Distrelec 제품 번호:
- 304-23-867
- 제조사 부품 번호:
- XY2CE2A250
- 제조업체:
- Telemecanique Sensors
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Telemecanique Sensors | |
| Product Type | Rope Pull Switch | |
| Contact Configuration | 1 NO/1 NC | |
| Mounting Orientation | Left Side | |
| IP Rating | IP65 | |
| Number of Cable Entries | 3 | |
| Series | XY2-CE | |
| Contact Current | 3A | |
| Contact AC Voltage | 240V ac | |
| E-Stop Button | Yes | |
| Contact DC Voltage | 250V dc | |
| Minimum Operating Temperature | -25°C | |
| Reset Button | Yes | |
| Maximum Operating Temperature | 70°C | |
| Housing Material | Zamak (Body), Stainless Steel (Cover) | |
| Width | 229 mm | |
| Standards/Approvals | No | |
| Length | 142mm | |
| Depth | 105mm | |
| Hazardous Area Certification | No | |
| Mechanical Life | 10Cycles | |
| Conduit Entry | PG13.5 | |
| 모두 선택 | ||
|---|---|---|
브랜드 Telemecanique Sensors | ||
Product Type Rope Pull Switch | ||
Contact Configuration 1 NO/1 NC | ||
Mounting Orientation Left Side | ||
IP Rating IP65 | ||
Number of Cable Entries 3 | ||
Series XY2-CE | ||
Contact Current 3A | ||
Contact AC Voltage 240V ac | ||
E-Stop Button Yes | ||
Contact DC Voltage 250V dc | ||
Minimum Operating Temperature -25°C | ||
Reset Button Yes | ||
Maximum Operating Temperature 70°C | ||
Housing Material Zamak (Body), Stainless Steel (Cover) | ||
Width 229 mm | ||
Standards/Approvals No | ||
Length 142mm | ||
Depth 105mm | ||
Hazardous Area Certification No | ||
Mechanical Life 10Cycles | ||
Conduit Entry PG13.5 | ||
Telemecanique Sensors Emergency Stop Rope Pull Switch
The Telemecanique Sensors XY2CJ series emergency stop rope pull switch has a 1NO/1NC contact configuration. It has Zamak housing and maximum AC/DC voltage is 240VAC and 250VDC and the current rating of the switch is 3A and 270mA for AC and DC respectively. It is designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available. This product is easy to install and offers a quick visual check of the switch status for machine restart. This switch has a rope span of 50m and the mounting orientation is to the left side.
Note:
Manufacturer part numbers with the suffix H29 are the ISO M20 threaded cable entry version.
Features and Benefits
Switches incorporate positive opening operation contacts with the tripping of the switch being made with positive action
Switch latches in the tripped position (N/C safety contact(s) open)
Function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 50m
Comes with a pilot light (direct supply)
Size of cable entry is PG13.5
Certifications
EN/ISO 13850:2006
IP65 rated
관련된 링크들
- Telemecanique Sensors XY2 Rope Pull Switch, 70m, Left Side
- Telemecanique Sensors XY2-CE Rope Pull Switch, 50m, NO/NC, Left Side
- Telemecanique Sensors XY2-CE Rope Pull Switch, 50m, 2NO/2NC, Left Side
- Telemecanique Sensors XY2CJ Rope Pull Switch, 30m, 2NC, Left Side
- Telemecanique Sensors XY2CJ Rope Pull Switch, 30m, NO/NC, Left Side
- Telemecanique Sensors XY2CJ Rope Pull Switch, 30m, NO/2NC, Left Side
- Telemecanique Sensors XY2-CE Rope Pull Switch, 50m, 2NC, Right Side
- Telemecanique Sensors XY2-CE Rope Pull Switch, 50m, NO/NC, Right Side