제조사부품번호

Omron ER Rope Pull Switch 188 mm, Left, Right, 3 NC

RS 제품 번호:: 214-6705
제조사 부품 번호:: 44506-4130 ER5018-030ME
제조업체:: Omron

Omron ER Rope Pull Switch 188 mm, Left, Right, 3 NC

Subtotal (1 unit)*

₩416,773.50

현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.

수량	한팩당
1 +	₩416,773.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 214-6705
제조사 부품 번호:: 44506-4130 ER5018-030ME
제조업체:: Omron

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Omron
	Product Type	Rope Pull Switch
	Contact Configuration	3 NC
	Indicator Type	Rope Tension
	Mounting Orientation	Left, Right
	IP Rating	IP67
	Number of Cable Entries	3
	Series	ER
	Contact DC Voltage	24V dc
	E-Stop Button	Yes
	Minimum Operating Temperature	-25°C
	Reset Button	Yes
	Contact Current	6A
	Maximum Operating Temperature	80°C
	Depth	74mm
	Length	188mm
	Housing Material	Die Cast Aluminium
	Standards/Approvals	CE, cUL, UL
	Width	57mm
	Hazardous Area Certification	No
	Conduit Entry	M20 x 3
	Mechanical Life	1000000Operations

	모두 선택
	브랜드 Omron
	Product Type Rope Pull Switch
	Contact Configuration 3 NC
	Indicator Type Rope Tension
	Mounting Orientation Left, Right
	IP Rating IP67
	Number of Cable Entries 3
	Series ER
	Contact DC Voltage 24V dc
	E-Stop Button Yes
	Minimum Operating Temperature -25°C
	Reset Button Yes
	Contact Current 6A
	Maximum Operating Temperature 80°C
	Depth 74mm
	Length 188mm
	Housing Material Die Cast Aluminium
	Standards/Approvals CE, cUL, UL
	Width 57mm
	Hazardous Area Certification No
	Conduit Entry M20 x 3
	Mechanical Life 1000000Operations

Omron Series ER Rope Pull Switch, M20 x 3 Conduit Entry, 6A Contact Current - 44506-4130 ER5018-030ME

This rope pull switch provides a compact, weatherproof emergency stopping method for industrial machinery, allowing operators to halt equipment quickly via a tensioned rope input. Housed in a corrosion-resistant die-cast aluminium enclosure with IP67 protection, it is intended for installation where hardwired rope-actuated safety control is required and can be mounted for left- or right-hand operation.

Features & Benefits

• Three normally-closed contacts provide redundant stop circuits
• Rated switching capability of 6A at 24V DC for control loads
• Continuous operating range from -25°C to 80°C for varied environments
• Mechanical endurance of 1 million operations for long service life
• M20 x 3 conduit entries with three cable entry points for flexible wiring
• Integral emergency-stop and reset buttons for clear manual intervention

Applications

• Suitable for conveyor line emergency shut-off installations
• Ideal for access-way safety on production lines and gantries
• Used with factory automation panels requiring rope tension detection
• Can be used for perimeter safety on material-handling equipment

How is the device protected against dust and water ingress?

The enclosure meets IP67, ensuring complete dust exclusion and temporary immersion protection for wet or washdown environments.

What mounting options are available for confined spaces?

It can be configured for left or right mounting orientation to suit restricted layouts and rope-routing requirements.

How does the unit indicate rope tension status?

A built-in rope tension indicator provides a visible signal of rope condition to aid inspection and adjustment.

Can it be installed where hazardous-area certification is required?

The device does not carry hazardous-area certification and therefore is not suitable for classified explosive atmospheres.