SKF HK 0608 6 mm ID Roller Bearing Drawn Cup Needle, 10 mm OD
- RS 제품 번호:
- 237-2192
- 제조사 부품 번호:
- HK 0608
- 제조업체:
- SKF
Subtotal (1 unit)*
₩7,538.80
재고있음
- 54 개 단위 배송 준비 완료
- 추가로 2026년 3월 12일 부터 212 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩7,538.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 237-2192
- 제조사 부품 번호:
- HK 0608
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 6 mm | |
| Race Width | 8mm | |
| Bore Type | Through Bore | |
| Dynamic Load Rating | 2.01kN | |
| Series | HK 0608 | |
| Outside Diameter | 10 mm | |
| End Type | Open | |
| Standards/Approvals | RoHS | |
| Static Load Rating | 1.73kN | |
| Limiting Speed | 20000rpm | |
| Number of Rows | 1 | |
| Bearing Type | Drawn Cup Needle | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 6 mm | ||
Race Width 8mm | ||
Bore Type Through Bore | ||
Dynamic Load Rating 2.01kN | ||
Series HK 0608 | ||
Outside Diameter 10 mm | ||
End Type Open | ||
Standards/Approvals RoHS | ||
Static Load Rating 1.73kN | ||
Limiting Speed 20000rpm | ||
Number of Rows 1 | ||
Bearing Type Drawn Cup Needle | ||
SKF Roller Bearing, Drawn Cup Needle Bearing Type, 6mm ID, 10mm OD, 0.4mm Chamfer Drawn Cup Dimension - HK 0608
To keep your system running where space is tight, use this roller bearing from SKF. As a drawn-cup type with a slim 8mm race width, it's ideal for compact applications that don't have room for a needle-and-cage assembly. Rest assured, this workhorse achieves speeds of 20,000r/min to keep up with fast-paced equipment. Thanks to a 2.01kN dynamic and 1.73kN static load rating, it's ready to get the ball rolling in crankshafts and engine joints.
Features & Benefits
• Made of bearing steel with high fatigue strength to stand up to repeated loading and unloading without breaking down
• Extremely light 2.1g weight doesn't put strain on your setup
• Compatible with a radial shaft seal to keep out contaminants
Applications
• Gearbox rebuilding
• Aerospace engineering
• Processing facilities
What does drawn cup mean?
A drawn-cup bearing means the outer ring is made of a thin wall made from a single metal sheet. This design cuts down on bulk and lowers the cross section to suit space-limited settings. As they have multiple rollers, these bearings have the high carrying capacity and stiffness needed in demanding applications.
관련된 링크들
- INA HK0608-B 6 mm ID Roller Bearing Drawn Cup Needle, 10 mm OD
- SKF HK 0509 5 mm ID Roller Bearing Drawn Cup Needle, 5 mm OD
- NTN HK2820 28 mm ID Needle Roller Bearing Drawn Cup Needle Roller, 35 mm OD
- NTN HK1212 12 mm ID Needle Roller Bearing Drawn Cup Needle Roller, 18 mm OD
- NTN HK3520 35 mm ID Needle Roller Bearing Drawn Cup Needle Roller, 42 mm OD
- NTN HK4012 40 mm ID Needle Roller Bearing Drawn Cup Needle Roller, 47 mm OD
- NTN HK2526 25 mm ID Needle Roller Bearing Drawn Cup Needle Roller, 32 mm OD
- NTN HK2520 25 mm ID Needle Roller Bearing Drawn Cup Needle Roller, 32 mm OD