SKF NUP 208 ECP/C3 40 mm ID Roller Bearing, 80 mm OD
- RS 제품 번호:
- 210-1452
- 제조사 부품 번호:
- NUP 208 ECP/C3
- 제조업체:
- SKF
Subtotal (1 unit)*
₩145,684.50
재고있음
- 추가로 2026년 5월 25일 부터 9 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩145,684.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 210-1452
- 제조사 부품 번호:
- NUP 208 ECP/C3
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 40mm | |
| Race Width | 18mm | |
| Bore Type | Cylindrical | |
| Cage Material | Non-Metallic | |
| Static Load Rating | 53kN | |
| Outside Diameter | 80mm | |
| Dynamic Load Rating | 62kN | |
| End Type | Shielded | |
| Standards/Approvals | No | |
| Limiting Speed | 11000rpm | |
| Number of Rows | 1 | |
| Internal Clearance | C3 | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 40mm | ||
Race Width 18mm | ||
Bore Type Cylindrical | ||
Cage Material Non-Metallic | ||
Static Load Rating 53kN | ||
Outside Diameter 80mm | ||
Dynamic Load Rating 62kN | ||
End Type Shielded | ||
Standards/Approvals No | ||
Limiting Speed 11000rpm | ||
Number of Rows 1 | ||
Internal Clearance C3 | ||
- COO (Country of Origin):
- DE
SKF Roller Bearing, 40mm Inside Diameter, 80mm Outside Diameter - NUP 208 ECP/C3
This roller bearing is a single-row cylindrical roller bearing designed to support radial loads in rotating equipment within automation, electrical and mechanical systems. It features a cylindrical bore and shielded ends to protect rolling elements during operation while accommodating internal running clearances suited to slightly increased radial play.
Features & Benefits
• 62 kN dynamic load rating delivers high radial capacity
• 53 kN static load rating resists heavy stationary loads
• 11 000 r/min limiting speed enables high-speed usage
• Non-metallic cage reduces noise and low-friction operation
• C3 internal clearance permits thermal expansion under load
• Shielded end design minimises contamination ingress
• 53 kN static load rating resists heavy stationary loads
• 11 000 r/min limiting speed enables high-speed usage
• Non-metallic cage reduces noise and low-friction operation
• C3 internal clearance permits thermal expansion under load
• Shielded end design minimises contamination ingress
**Applications**
• Suitable for high-speed motor spindles in automation equipment
• Ideal for drive rollers in conveyor assemblies
• Used with gearbox shafts subject to heavy radial loads
• Can be used for electrical machine rotor support
• Suitable for precision test rigs requiring defined clearance
• Ideal for drive rollers in conveyor assemblies
• Used with gearbox shafts subject to heavy radial loads
• Can be used for electrical machine rotor support
• Suitable for precision test rigs requiring defined clearance
What mass should installers expect when handling this item?
The bearing has a mass of 0.4kg, allowing straightforward manual fitting and handling.
Which seat and abutment dimensions are relevant for housing design?
Key abutment values include da min 47mm, db min 56mm and Da max 72.8mm for correct seating.
What are the reference and calculation parameters for life estimation?
Use a reference speed of 9 500 r/min and calculation factor kr 0.15 with fatigue limit Pu 6.7 kN for L10 assessments.
How does the internal geometry influence axial location?
The single-row NUP design permits axial locating on one side using a flange or shoulder while enabling shaft displacement on the opposite side.
Which corner radii must mating components respect?
Minimum fillet radii to mate with the races are r1,2 min 1.1mm and r3,4 min 1.1mm.
관련된 링크들
- SKF NUP 208 ECP 40 mm ID Cylindrical Roller Bearing, 80 mm OD
- SKF NUP 307 ECP 35 mm ID Roller Bearing, 80 mm OD
- SKF NUP 2208 ECP 40 mm ID Roller Bearing, 80 mm OD
- SKF NUP 2307 ECP 35 mm ID Roller Bearing, 80 mm OD
- SKF NUP 216 ECP 80 mm ID Cylindrical Roller Bearing, 140 mm OD
- SKF NUP 316 ECP 80 mm ID Cylindrical Roller Bearing, 170 mm OD
- SKF NUP 2216 ECP 80 mm ID Cylindrical Roller Bearing, 140 mm OD
- SKF NUP 206 ECP 40 mm ID Cylindrical Roller Bearing, 80 mm OD