Subtotal (1 unit)*
₩9,005.20
재고있음
- 61 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩9,005.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 208-0179
- 제조사 부품 번호:
- HK 1412
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 14 mm | |
| Race Width | 12mm | |
| Bore Type | Parallel | |
| Outside Diameter | 20 mm | |
| Dynamic Load Rating | 6.82kN | |
| Standards/Approvals | No | |
| Number of Rows | 1 | |
| Limiting Speed | 17000rpm | |
| Static Load Rating | 8.65kN | |
| Bearing Type | Needle | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 14 mm | ||
Race Width 12mm | ||
Bore Type Parallel | ||
Outside Diameter 20 mm | ||
Dynamic Load Rating 6.82kN | ||
Standards/Approvals No | ||
Number of Rows 1 | ||
Limiting Speed 17000rpm | ||
Static Load Rating 8.65kN | ||
Bearing Type Needle | ||
SKF Roller Bearing, Needle, 14mm ID, 20mm OD - HK 1412
Need a small, lightweight roller bearing to support heavy loads? Choose this 14mm needle roller bearing from SKF. It's made using a deep-drawing manufacturing process that leaves no joins on the outer cup, which means it's both watertight and resistant to impact. The cup is made from hardened steel, which is highly durable for use in harsh industrial settings. With a high dynamic load rating of 6.82kN and static load rating of 8.65kN, this bearing is ideal for heavy-duty use.
• Cage construction helps stabilise the rollers and enhances lubricant circulation
• Tapered roller ends prevent stress peaks, which can cause needles to skew
• Lubrication hole in the outer ring makes regreasing easy
Applications
• Vehicle parts
• Agricultural components
• Power tools
• Construction equipment
Can this needle roller bearing be fitted directly to the shaft?
Yes, this bearing is usually fitted directly to the shaft. It can also be combined with an inner ring if needed.
Do I need a snap ring to fit this needle roller bearing to the shaft?
No – because of the tight interference fit in the housing bore, this unit will stay in position without a snap ring.
관련된 링크들
- NTN HK1412FM 14 mm ID Needle Roller Bearing Drawn Cup, Needle Roller, 20 mm OD
- INA HK1412-B 14 mm ID Roller Bearing Drawn Cup Needle, 20 mm OD
- SKF HK 1416.2RS 14 mm ID Needle Roller Bearing Needle, 20 mm OD
- SKF HK 1015 10 mm ID Roller Bearing Needle, 14 mm OD
- SKF HK 1012 10 mm ID Roller Bearing Needle, 14 mm OD
- SKF HK1010E 10 mm ID Roller Bearing Needle, 14 mm OD
- SKF HK 1012 RS 10 mm ID Roller Bearing Needle, 14 mm OD
- SKF HK 1014.2RS 10 mm ID Needle Roller Bearing, 14 mm OD