Subtotal (1 unit)*
₩2,049,333.00
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 1 + | ₩2,049,333.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 208-0081
- 제조사 부품 번호:
- 32940
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 200mm | |
| Bore Type | Parallel | |
| Roller Material | Steel | |
| Static Load Rating | 950kN | |
| Cone Width | 54.18mm | |
| Bearing Dynamic Load Rating | 588kN | |
| Standards/Approvals | No | |
| Outside Diameter | 280mm | |
| Limiting Speed | 2000rpm | |
| End Type | Open | |
| Bearing Type | Taper | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 200mm | ||
Bore Type Parallel | ||
Roller Material Steel | ||
Static Load Rating 950kN | ||
Cone Width 54.18mm | ||
Bearing Dynamic Load Rating 588kN | ||
Standards/Approvals No | ||
Outside Diameter 280mm | ||
Limiting Speed 2000rpm | ||
End Type Open | ||
Bearing Type Taper | ||
- COO (Country of Origin):
- DE
SKF Taper Roller Bearing, 200 mm ID, 280 mm OD - 32940
This SKF bearing features tapered rollers and rings (or raceways) and provides an effective solution when you need to accommodate simultaneous thrust and radial loads. Its optimised design and surface finish promote lubricant film formation. This means friction is reduced during rotation, which increases durability and extends the unit's working life. It also helps the bearing run quietly. Thanks to this reliably long service life, you don't need to replace the bearing as frequently as some alternatives. Separable, interchangeable components make maintenance and inspection easy.
• Parallel bore type
• Compact structure
• Low maintenance, noise and vibration
• Inside diameter of 200 mm
• Outside diameter of 280 mm
• Race width of 54.18 mm
Application Information
• Electric motors
• Fans
• Gearboxes
• Pumps
What is static load bearing?
The static load rating for bearings is the maximum load they can hold before suffering damage. Exceeding this limit creates undue contact stress on the most heavily-loaded rolling element (the raceway) and will cause permanent deformation. Choosing the correct bearing for the required load is vital.
관련된 링크들
- FAG 32940-A Taper Roller 200 mm ID Tapered Roller Bearing, 280 mm OD
- SKF 32036 X Taper 180 mm ID Roller Bearing, 280 mm OD
- SKF 30319 Taper Roller 95 mm ID Tapered Roller Bearing, 200 mm OD
- SKF 32222 Taper 110 mm ID Roller Bearing, 200 mm OD
- SKF 32040 X Taper Roller 200 mm ID Tapered Roller Bearing, 310 mm OD
- SKF 32026 X Taper 130 mm ID Roller Bearing, 200 mm OD
- SKF 22222 E Taper 110 mm ID Roller Bearing, 200 mm OD
- SKF 21319 E Taper 95 mm ID Roller Bearing, 200 mm OD