Subtotal (1 unit)*
₩51,012.00
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 1 + | ₩51,012.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 208-0056
- 제조사 부품 번호:
- 32304
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 20mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| Bearing Material | Steel | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 44.8kN | |
| End Type | Shielded | |
| Outside Diameter | 52mm | |
| Static Load Rating | 46.5kN | |
| Cup Width | 18mm | |
| Number of Rows | 1 | |
| Cone Width | 22.25mm | |
| Limiting Speed | 14000rpm | |
| Race Type | Tapered | |
| Bearing Type | Taper | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 20mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
Bearing Material Steel | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 44.8kN | ||
End Type Shielded | ||
Outside Diameter 52mm | ||
Static Load Rating 46.5kN | ||
Cup Width 18mm | ||
Number of Rows 1 | ||
Cone Width 22.25mm | ||
Limiting Speed 14000rpm | ||
Race Type Tapered | ||
Bearing Type Taper | ||
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
관련된 링크들
- FAG 32304-A Taper Roller 20 mm ID Roller Bearing, 52 mm OD
- SNR 32304A Taper Roller 20 mm ID Roller Bearing, 52 mm OD
- RS PRO 32304 Taper 20 mm ID Roller Bearing, 52 mm OD
- NTN 4T-32304 Taper Roller 20 mm ID Roller Bearing, 52 mm OD
- SKF 639174 Taper 26 mm ID Roller Bearing, 52 mm OD
- SKF 30304 Taper 20 mm ID Roller Bearing, 52 mm OD
- SKF 33205 Taper 25 mm ID Roller Bearing, 52 mm OD
- SKF 320/28 X Taper 28 mm ID Roller Bearing, 52 mm OD