Subtotal (1 unit)*
₩253,574.40
재고있음
- 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩253,574.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 208-0030
- 제조사 부품 번호:
- 32021 X
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 105 mm | |
| Bore Type | Parallel | |
| Static Load Rating | 335kN | |
| Cup Width | 26mm | |
| Number of Rows | 1 | |
| Cone Width | 35mm | |
| Bearing Dynamic Load Rating | 248 KN | |
| End Type | Shielded | |
| Outside Diameter | 160 mm | |
| Limiting Speed | 3800rpm | |
| Standards/Approvals | No | |
| Bearing Type | Taper | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 105 mm | ||
Bore Type Parallel | ||
Static Load Rating 335kN | ||
Cup Width 26mm | ||
Number of Rows 1 | ||
Cone Width 35mm | ||
Bearing Dynamic Load Rating 248 KN | ||
End Type Shielded | ||
Outside Diameter 160 mm | ||
Limiting Speed 3800rpm | ||
Standards/Approvals No | ||
Bearing Type Taper | ||
- COO (Country of Origin):
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
관련된 링크들
- NTN 32021XU Taper Roller 105 mm ID Taper Roller Bearing, 160 mm OD
- RS PRO 32021-X Taper 105 mm ID Roller Bearing, 160 mm OD
- SNR 32021A Single Row Tapered Roller 105 mm ID Roller Bearing, 160 mm OD
- NTN 33021U Taper Roller 105 mm ID Taper Roller Bearing, 160 mm OD
- FAG 33021 Taper Roller 105 mm ID Roller Bearing, 160 mm OD
- SKF 32032 X/DF Taper Roller 160 mm ID Taper Roller Bearing, 240 mm OD
- SKF 32221 Taper 105 mm ID Roller Bearing, 190 mm OD
- SKF 30221 Taper 105 mm ID Roller Bearing, 190 mm OD