The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.

Low friction

Enhanced operational reliability

Rigid bearing application

A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.

Running-in period with reduced temperature peaks

Separable and interchangeable

The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.

모두 선택	제품 정보	값
	브랜드	SKF
	Product Type	Roller Bearing
	Inside Diameter	130 mm
	Bore Type	Parallel
	End Type	Shielded
	Bearing Dynamic Load Rating	451 KN
	Standards/Approvals	No
	Outside Diameter	230 mm
	Limiting Speed	2800rpm
	Static Load Rating	490kN
	Cup Width	34mm
	Number of Rows	1
	Cone Width	45.05mm
	Bearing Type	Taper

	모두 선택
	브랜드 SKF
	Product Type Roller Bearing
	Inside Diameter 130 mm
	Bore Type Parallel
	End Type Shielded
	Bearing Dynamic Load Rating 451 KN
	Standards/Approvals No
	Outside Diameter 230 mm
	Limiting Speed 2800rpm
	Static Load Rating 490kN
	Cup Width 34mm
	Number of Rows 1
	Cone Width 45.05mm
	Bearing Type Taper

SKF 30226 Taper 130 mm ID Roller Bearing, 230 mm OD

관련된 링크들