Subtotal (1 unit)*
₩114,933.00
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 1 + | ₩114,933.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 207-9984
- 제조사 부품 번호:
- 30215
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Tapered Roller Bearing | |
| Inside Diameter | 75mm | |
| Bore Type | Cylindrical | |
| Cage Material | Sheet Metal | |
| Cone Width | 22mm | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 171kN | |
| Standards/Approvals | No | |
| Static Load Rating | 176kN | |
| Cup Width | 22mm | |
| Number of Rows | 1 | |
| Limiting Speed | 5000rpm | |
| Outside Diameter | 130mm | |
| Bearing Material | Steel | |
| Race Type | Tapered | |
| Bearing Type | Taper | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Tapered Roller Bearing | ||
Inside Diameter 75mm | ||
Bore Type Cylindrical | ||
Cage Material Sheet Metal | ||
Cone Width 22mm | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 171kN | ||
Standards/Approvals No | ||
Static Load Rating 176kN | ||
Cup Width 22mm | ||
Number of Rows 1 | ||
Limiting Speed 5000rpm | ||
Outside Diameter 130mm | ||
Bearing Material Steel | ||
Race Type Tapered | ||
Bearing Type Taper | ||
- COO (Country of Origin):
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing Axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the Value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
관련된 링크들
- SNR 30215A Taper Roller 75 mm ID Roller Bearing, 130 mm OD
- RS PRO 30215 Taper 75 mm ID Roller Bearing, 130 mm OD
- NTN 4T-30215 Taper Roller 75 mm ID Roller Bearing, 130 mm OD
- FAG 30215-A Taper 75 mm ID Tapered Roller Bearing, 130 mm OD
- SKF 33017 Taper 85 mm ID Roller Bearing, 130 mm OD
- SKF 33215 Taper Roller 75 mm ID Tapered Roller Bearing, 130 mm OD
- SKF 32215 Taper 75 mm ID Roller Bearing, 130 mm OD
- NSK 30215J Tapered 75 mm ID Tapered Roller Bearing, 130 mm OD