Subtotal (1 unit)*
₩143,480.00
재고있음
- 16 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩143,480.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 207-8765
- 제조사 부품 번호:
- NKX 25 Z
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 25mm | |
| Race Width | 30mm | |
| Bore Type | Round | |
| Roller Material | Steel | |
| Standards/Approvals | ISO - F6 (Fw) + E8 (d) | |
| Series | NKX 25 Z | |
| Dynamic Load Rating | 19kN | |
| Limiting Speed | 5500rpm | |
| Outside Diameter | 43.2mm | |
| Static Load Rating | 32.5kN | |
| Bearing Material | Steel | |
| Number of Rows | 1 | |
| Bearing Type | Needle | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 25mm | ||
Race Width 30mm | ||
Bore Type Round | ||
Roller Material Steel | ||
Standards/Approvals ISO - F6 (Fw) + E8 (d) | ||
Series NKX 25 Z | ||
Dynamic Load Rating 19kN | ||
Limiting Speed 5500rpm | ||
Outside Diameter 43.2mm | ||
Static Load Rating 32.5kN | ||
Bearing Material Steel | ||
Number of Rows 1 | ||
Bearing Type Needle | ||
SKF Roller Bearing, Combined Needle Roller And Sealed Thrust Ball Bearing, 25mm ID, 43.2mm OD - NKX 25 Z
Looking for a bearing that can cope with high turning speeds? This roller bearing from SKF is just the thing. By slipping this unit on a 25mm-wide axle, you get a nifty assembly that can move at up to 5,500r/min. As this clever device combines needle and ball rolling elements, it breezes through tasks that involve radial and axial loads in one direction. It's made of strong steel, so it holds its own against bumps, abrasion and contamination.
Features & Benefits
• Light weight of 130g minimises strain on your setup
• Stamped steel cover on the ball bearing seals the grease in to ensure smooth and reliable motion
• Low cross-sectional height of 43.2mm lets you use it in tight or awkward spaces
• Needle roller bearing design minimises friction to cut wear and heat generation
• Combined unit is suitable for use in settings where a separate needle and ball bearing would take up too much space
Applications
• Agricultural equipment
• Lifts and hoists
• Automotive technology
Does this roller bearing withstand heavy loads?
Yes. The basic dynamic rating of this product is 19kN for radial forces and 19.5kN for axial ones, so it's reliable under heavy loads.
관련된 링크들
- SKF NKX 35 Z 35 mm ID Needle Roller Bearing Thrust Ball, Needle Roller, 47 mm OD
- SKF NKX 70 Z 70 mm ID Roller Bearing Needle, 95 mm OD
- SKF NKX 50 Z 50 mm ID Roller Bearing Needle, 70 mm OD
- SKF NKX 30 Z 30 mm ID Combined Needle Roller & Thrust Ball Bearing Needle, 42 mm OD
- SKF NKX 45 Z 45 mm ID Roller Bearing Thrust Ball, Needle Roller, 58 mm OD
- SKF NKX 17 Z 17 mm ID Roller Bearing Thrust Ball, Needle Roller, 26 mm OD
- SKF NKX 40 Z 40 mm ID Roller Bearing Needle Roller, Thrust Ball, 52 mm OD
- SKF NKX 20 Z 20 mm ID Roller Bearing Needle Roller, Thrust Ball, 30 mm OD