SKF NJ 2212 ECP/C3 60 mm ID Roller Bearing, 110 mm OD

모든 Roller Bearings 열람하기

Subtotal (1 unit)*

₩286,580.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 9월 28일 부터 2 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩286,580.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
207-8610
제조사 부품 번호:
NJ 2212 ECP/C3
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Product Type

Roller Bearing

Inside Diameter

60mm

Race Width

28mm

Bore Type

Cylindrical

Roller Material

Steel

Cage Material

Non-Metallic

Internal Clearance

C3

Bearing Material

Steel

Number of Rows

1

Dynamic Load Rating

146kN

Standards/Approvals

No

Series

NJ

Limiting Speed

7500rpm

Static Load Rating

153kN

Outside Diameter

110mm

COO (Country of Origin):
DE

SKF Series NJ Roller Bearing, 60mm Inside Diameter, 110mm Outside Diameter - NJ 2212 ECP/C3


This roller bearing is a cylindrical-bore single-row element designed to support radial loads in rotating assemblies where controlled internal play and robust load capacity are required. It combines steel rolling elements with a non‑metallic cage to maintain roller separation while operating at moderate rotational speeds, making it suitable for industrial shaft and housing arrangements.

Features and Benefits:


• 153 kN static capacity for high resistance to stationary loads
• 146 kN dynamic rating for sustained operational loading
• C3 internal clearance to accommodate thermal expansion
• Non‑metallic cage reduces noise and frictional heating
• Steel rollers and rings for consistent contact fatigue performance
• Limiting speed 7,500 rev/min for reliable rotational operation

Applications


• Suitable for heavy‑duty radial shaft supports in industrial drives
• Used for gearbox intermediate shaft load‑bearing duties
• Ideal for mill and conveyor roll support assemblies
• Can be used for motor spindle radial support where clearance is needed
• Used with reduction units requiring controlled internal clearance

What bore configuration does this unit use?


It uses a cylindrical bore suited to straight‑shank shaft fittings.

How many rows of rolling elements are included?


It contains a single row of rollers for radial load transmission.

Which component limits the assembly's maximum rotational speed?


The bearing's construction specifies a limiting speed of 7,500 rev/min based on material interactions.

What internal clearance grade is provided and why is it important?


The clearance is C3, which allows additional radial play to compensate for thermal growth during operation.

What materials are used for the rollers and cage?


Rollers and rings are steel, while the cage is manufactured from a non‑metallic material.

관련된 링크들