SKF NJ 2311 ECP/C3 55 mm ID Roller Bearing, 12 mm OD
- RS 제품 번호:
- 195-9698
- 제조사 부품 번호:
- NJ 2311 ECP/C3
- 제조업체:
- SKF
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩461,746.80
재고있음
- 2 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 12 | ₩461,746.80 |
| 13 - 24 | ₩443,275.80 |
| 25 + | ₩434,041.24 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 195-9698
- 제조사 부품 번호:
- NJ 2311 ECP/C3
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 55 mm | |
| Race Width | 43mm | |
| Bore Type | Cylindrical | |
| Static Load Rating | 232kN | |
| Limiting Speed | 7000rpm | |
| Series | NJ 2311 ECP | |
| Dynamic Load Rating | 232kN | |
| Standards/Approvals | No | |
| End Type | Open | |
| Outside Diameter | 12 mm | |
| Number of Rows | 1 | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 55 mm | ||
Race Width 43mm | ||
Bore Type Cylindrical | ||
Static Load Rating 232kN | ||
Limiting Speed 7000rpm | ||
Series NJ 2311 ECP | ||
Dynamic Load Rating 232kN | ||
Standards/Approvals No | ||
End Type Open | ||
Outside Diameter 12 mm | ||
Number of Rows 1 | ||
제외
Single row cylindrical roller bearings
SKF single row cylindrical roller bearings are available in many designs, series and sizes.
Features:
C3 Clearance on this model.
High load carrying capacity
High stiffness
Accommodate axial displacement
Except for bearings with flanges on both the inner and outer rings.
Low friction
The open flange design,
together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capability.
Long service life
The logarithmic roller profile reduces edge stresses at the roller/raceway contact and sensitivity to misalignment and shaft deflection.
Enhanced operational reliability
The surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film.
Separable and interchangeable
The separable components of SKF cylindrical roller bearings are interchangeable. This facilitates mounting and dismounting, as well as maintenance inspections.
관련된 링크들
- SKF NJ 2311 ECP 55 mm ID Cylindrical Roller Bearing, 120 mm OD
- SKF NJ 2311 ECP/C4 55 mm ID Roller Bearing, 120 mm OD
- SKF NU 2311 ECP 55 mm ID Roller Bearing, 120 mm OD
- SKF NUP 2311 ECP 55 mm ID Cylindrical Roller Bearing, 120 mm OD
- SKF NU 2311 ECP/C3 55 mm ID Roller Bearing, 120 mm OD
- SKF NJ 2311 ECML/C3 55 mm ID Roller Bearing, 120 mm OD
- SKF NJ 311 ECP 55 mm ID Cylindrical Roller Bearing, 120 mm OD
- SKF NJ 311 ECP/C3 55 mm ID Roller Bearing, 120 mm OD