INA NK85/35-XL 85 mm ID Roller Bearing Needle, 85 mm OD
- RS 제품 번호:
- 194-7370
- 제조사 부품 번호:
- NK85/35-XL
- 제조업체:
- INA
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩262,470.00
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 1 - 12 | ₩262,470.00 |
| 13 - 24 | ₩251,979.00 |
| 25 + | ₩246,733.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 194-7370
- 제조사 부품 번호:
- NK85/35-XL
- 제조업체:
- INA
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 85mm | |
| Race Width | 35mm | |
| Bore Type | Parallel | |
| Outside Diameter | 85mm | |
| Dynamic Load Rating | 111kN | |
| Static Load Rating | 193kN | |
| End Type | Open | |
| Standards/Approvals | No | |
| Bearing Type | Needle | |
| 모두 선택 | ||
|---|---|---|
브랜드 INA | ||
Product Type Roller Bearing | ||
Inside Diameter 85mm | ||
Race Width 35mm | ||
Bore Type Parallel | ||
Outside Diameter 85mm | ||
Dynamic Load Rating 111kN | ||
Static Load Rating 193kN | ||
End Type Open | ||
Standards/Approvals No | ||
Bearing Type Needle | ||
The Bearings can support high to very high radial forces
Are used when the load carrying capacity or accuracy of drawn cup needle roller bearings with open ends is no longer sufficient and the high load capacity of cylindrical roller bearings is not yet required
Can only support radial loads and, as a result, are highly suitable for use as non-locating bearings (they permit axial displacement of the shaft relative to the housing in the bearing)
Permit high speeds in spite of line contact
Compensate misalignments between the shaft and housing (aligning needle roller bearings)
Require only a very small radial design envelope, particularly if the bearing arrangement is designed without an inner ring
Are available in numerous sizes and designs
Result in particularly compact, cost-effective and economical bearing arrangements
관련된 링크들
- INA NK70/35-XL 70 mm ID Roller Bearing Needle, 85 mm OD
- INA NK85/25-XL 85 mm ID Roller Bearing Needle, 105 mm OD
- INA NK35/30-TV-XL 35 mm ID Roller Bearing Needle, 45 mm OD
- INA NK70/25-XL 70 mm ID Roller Bearing Needle, 85 mm OD
- INA NK80/35-XL 95 mm ID Roller Bearing Needle, 95 mm OD
- INA NK60/35-XL 60 mm ID Roller Bearing Needle, 72 mm OD
- INA NK68/35-XL 82 mm ID Roller Bearing Needle, 82 mm OD
- INA NK73/35-XL 90 mm ID Roller Bearing Needle, 90 mm OD