대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal (1 unit)*
₩93,320.00
재고있음
- 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 12 | ₩93,320.00 |
| 13 - 24 | ₩89,620.00 |
| 25 + | ₩87,700.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 194-6815
- 제조사 부품 번호:
- 81105-TV
- 제조업체:
- INA
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 25mm | |
| Race Width | 11mm | |
| Bore Type | Parallel | |
| Dynamic Load Rating | 33.5kN | |
| Series | 81105-TV | |
| Outside Diameter | 42mm | |
| Standards/Approvals | No | |
| Limiting Speed | 8600rpm | |
| Static Load Rating | 76kN | |
| End Type | Open | |
| 모두 선택 | ||
|---|---|---|
브랜드 INA | ||
Product Type Roller Bearing | ||
Inside Diameter 25mm | ||
Race Width 11mm | ||
Bore Type Parallel | ||
Dynamic Load Rating 33.5kN | ||
Series 81105-TV | ||
Outside Diameter 42mm | ||
Standards/Approvals No | ||
Limiting Speed 8600rpm | ||
Static Load Rating 76kN | ||
End Type Open | ||
Schaeffler 81105-TV Series Roller Bearing, 42mm Outside Diameter, 25mm Inside Diameter - 81105-TV
This roller bearing is designed to support rotating assemblies where a robust open configuration is required, providing radial load-carrying capacity and suited to medium-speed applications. It is intended for use in mechanical systems that demand consistent rolling-contact performance with a parallel bore.
Features and Benefits:
• Static load capacity 76 kN delivers sustained support under high preload
• Dynamic load rating 33.5 kN improves operational fatigue life
• Limiting speed 8,600 rpm enables use in moderate-speed drives
• Race width 11 mm offers Compact axial space usage
• Open end type allows straightforward inspection and lubrication
• Dynamic load rating 33.5 kN improves operational fatigue life
• Limiting speed 8,600 rpm enables use in moderate-speed drives
• Race width 11 mm offers Compact axial space usage
• Open end type allows straightforward inspection and lubrication
Applications
• Suitable for agricultural driveline components requiring service access
• Ideal for light industrial gearboxes with frequent maintenance
• Used with centrifugal pumps operating at moderate rotational speeds
• Can be used for conveyor idlers in material-handling lines
• Suitable for electric motor auxiliary bearings with parallel bores
• Ideal for light industrial gearboxes with frequent maintenance
• Used with centrifugal pumps operating at moderate rotational speeds
• Can be used for conveyor idlers in material-handling lines
• Suitable for electric motor auxiliary bearings with parallel bores
What shaft fit does the bore accommodate?
The internal diameter measures 25 mm and is supplied as a parallel bore for interference or transition fits depending on mounting practice.
How should lubrication be applied given the bearing configuration?
The open end permits direct re-lubrication and Visual checks to maintain film thickness and reduce wear.
What operating condition limits rotational speed?
The rated limiting speed is 8,600 rpm, above which internal heat and centrifugal forces may compromise performance.
How does the bearing cope with static loads during standstill?
It offers a static load capacity of 76 kN which supports sustained loads without permanent deformation.
관련된 링크들
- INA K81105-TV-A/0-8 25 mm ID Roller Bearing, 42 mm OD
- INA WS81105 Roller Bearing Shaft Location Washer, 42 mm OD
- INA, GS81105 Roller Bearing Housing Locating Washer 42 mm OD
- SKF 81105 TN Thrust 25 mm ID Roller Bearing, 42 mm OD
- INA NK32/20-TV-XL 32 mm ID Roller Bearing Needle, 42 mm OD
- INA 81114-TV 70 mm ID Roller Bearing, 95 mm OD
- INA 81110-TV 50 mm ID Roller Bearing, 70 mm OD
- INA 81111-TV 55 mm ID Roller Bearing, 78 mm OD