Timken 30210 Taper 50 mm ID Metric Roller Bearing, 90 mm OD
- RS 제품 번호:
- 193-0995
- 제조사 부품 번호:
- 30210
- 제조업체:
- Timken
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩63,732.00
재고있음
- 17 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 12 | ₩63,732.00 |
| 13 - 24 | ₩61,175.20 |
| 25 + | ₩59,896.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 193-0995
- 제조사 부품 번호:
- 30210
- 제조업체:
- Timken
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 50 mm | |
| Bore Type | Tapered | |
| Roller Material | Steel | |
| Cage Material | Sheet Metal | |
| Outside Diameter | 90 mm | |
| Static Load Rating | 87.4kN | |
| Standards/Approvals | No | |
| Bearing Material | Steel | |
| Limiting Speed | 7500rpm | |
| Number of Rows | 1 | |
| Cone Width | 21.75mm | |
| Cup Width | 17mm | |
| Series | TRB | |
| Bearing Dynamic Load Rating | 79.5 kN | |
| Bearing Type | Taper | |
| Race Type | Grooved | |
| 모두 선택 | ||
|---|---|---|
브랜드 Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 50 mm | ||
Bore Type Tapered | ||
Roller Material Steel | ||
Cage Material Sheet Metal | ||
Outside Diameter 90 mm | ||
Static Load Rating 87.4kN | ||
Standards/Approvals No | ||
Bearing Material Steel | ||
Limiting Speed 7500rpm | ||
Number of Rows 1 | ||
Cone Width 21.75mm | ||
Cup Width 17mm | ||
Series TRB | ||
Bearing Dynamic Load Rating 79.5 kN | ||
Bearing Type Taper | ||
Race Type Grooved | ||
- COO (Country of Origin):
- PL
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
관련된 링크들
- RS PRO 30210 Taper 50 mm ID Metric Roller Bearing, 90 mm OD
- Timken 30308 Taper 40 mm ID Metric Roller Bearing, 90 mm OD
- Timken 33210 Taper 50 mm ID Metric Roller Bearing, 90 mm OD
- Timken 32210 Taper 50 mm ID Metric Roller Bearing, 90 mm OD
- NSK 30210J Taper 50 mm ID Taper Roller Bearing, 90 mm OD
- NTN 4T-30210 Taper Roller 50 mm ID Taper Roller Bearing, 90 mm OD
- Timken 32011X Taper 55 mm ID Metric Roller Bearing, 90 mm OD
- SKF 30210 Taper 50 mm ID Roller Bearing, 90 mm OD