제조사부품번호

INA BK0709-B 7 mm ID Roller Bearing Drawn Cup Needle, 11 mm OD

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩9,126.00

일시적 품절

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

* 참고 가격: 실제 구매가격과 다를 수 있습니다

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

	모두 선택
	브랜드 INA
	Product Type Roller Bearing
	Inside Diameter 7mm
	Race Width 9mm
	Bore Type Parallel
	Cage Material Steel
	Static Load Rating 2.95kN
	Outside Diameter 11mm
	Dynamic Load Rating 3.1kN
	End Type Sealed
	Standards/Approvals No
	Bearing Type Drawn Cup Needle

Are particularly suitable for applications with a very small radial section height on account of their very low cross-sectional height

Are used if the housing bore is not suitable as a raceway for needle roller and cage assemblies

Can support high radial loads (are pure radial bearings)

Require a considerably smaller radial design envelope than machined needle roller bearings

Usually run directly on the shaft (no inner ring)

Permit relatively high speeds

Are easy to mount

Require no additional means of axial retention (as a result of which the housing bore is easy to produce)

Can be readily used to close off the shaft ends of bearing positions (drawn cup needle roller bearings with closed end)

Result in particularly compact, cost-effective and economical bearing arrangements

관련된 링크들