FAG 31308-XL Taper 40 mm ID Roller Bearing, 90 mm OD
- RS 제품 번호:
- 190-8362
- 제조사 부품 번호:
- 31308-XL
- 제조업체:
- FAG
Subtotal (1 unit)*
₩117,612.80
일시적 품절
- 2026년 3월 13일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩117,612.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 190-8362
- 제조사 부품 번호:
- 31308-XL
- 제조업체:
- FAG
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 40 mm | |
| Bore Type | Tapered | |
| Cage Material | Steel | |
| Series | 313 | |
| Static Load Rating | 83kN | |
| Cone Width | 25.25mm | |
| Outside Diameter | 90 mm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 89 KN | |
| End Type | Open | |
| Bearing Type | Taper | |
| 모두 선택 | ||
|---|---|---|
브랜드 FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 40 mm | ||
Bore Type Tapered | ||
Cage Material Steel | ||
Series 313 | ||
Static Load Rating 83kN | ||
Cone Width 25.25mm | ||
Outside Diameter 90 mm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 89 KN | ||
End Type Open | ||
Bearing Type Taper | ||
High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
관련된 링크들
- SNR 31308A Taper Roller 40 mm ID Roller Bearing, 90 mm OD
- FAG 23218-E1A-XL-K-M Taper 90 mm ID Roller Bearing, 160 mm OD
- FAG 33118 Taper Roller 90 mm ID Roller Bearing, 150 mm OD
- FAG 31318 Taper Roller 90 mm ID Roller Bearing, 190 mm OD
- FAG 33018 Taper Roller 90 mm ID Roller Bearing, 140 mm OD
- FAG 30318-A Taper Roller 90 mm ID Roller Bearing, 190 mm OD
- FAG 32948-XL Taper Roller 240 mm ID Tapered Roller Bearing, 320 mm OD
- FAG 32208-XL Taper 40 mm ID Roller Bearing, 80 mm OD