FAG NUP209-E-XL-TVP2 45 mm ID Roller Bearing, 85 mm OD

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩152,825.20

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 3월 19일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 12₩152,825.20
13 - 24₩146,715.20
25 +₩143,650.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
174-1328
제조사 부품 번호:
NUP209-E-XL-TVP2
제조업체:
FAG
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

FAG

Product Type

Roller Bearing

Inside Diameter

45 mm

Race Width

19mm

Bore Type

Parallel

Limiting Speed

10200rpm

Standards/Approvals

No

End Type

Open

Static Load Rating

63kN

Dynamic Load Rating

72kN

Outside Diameter

85 mm

Single row cylindrical roller bearings with cage are units comprising solid inner and outer rings together with cylindrical roller and cage assemblies. The outer rings have rigid ribs on both sides or no ribs, the inner rings have one or two rigid ribs or are designed without ribs. The cage prevents the cylindrical rollers from coming into contact with each other during rolling. The cage type bearings are very rigid, can support high radial loads and, due to the cage, are suitable for higher speeds than the full complement designs. Bearings with the suffix E have a higher capacity roller set and are thus designed for very high load carrying capacity. The bearings are separable and are therefore easier to fit and dismantle.

Non-locating bearings

Axial displacement

Semi-locating bearings

Bearings with L-section ring

Axial displacement

Locating bearings

Bearings with rib washer

관련된 링크들