FAG NU204-E-XL-TVP2 20mm I.D Cylindrical Roller Bearing, 47mm O.D
- RS 제품 번호:
- 174-1311
- 제조사 부품 번호:
- NU204-E-XL-TVP2
- 제조업체:
- FAG
대량 구매 할인 기용 가능
가격 개당**
₩59,776.48
현재 시스템 에러로 재고 수량 확인이 불가합니다. krenquiry@rs-components.com 에 문의하시거나 잠시후에 다시 시도해주시기 바랍니다.
수량 | 한팩당 |
---|---|
1 - 12 | ₩59,776.48 |
13 - 24 | ₩57,396.40 |
25 + | ₩56,189.44 |
** 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 174-1311
- 제조사 부품 번호:
- NU204-E-XL-TVP2
- 제조업체:
- FAG
FAG Cylindrical Roller Bearing NU204-E-XL-TVP2
The FAG 20mm ID, 47mm OD cylindrical roller bearing with a glass fibre reinforced polyamide cage and the removable inner ring is suitable for applications that support high radial loads and no axial loads. It has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than CN (normal) and the press fit inner and outer rings can withstand a large temperature differential. This clearance allows for thermal expansion as the bearing supports radial loads and its cylindrical rollers reduce rotational friction. This cylindrical roller bearing can support heavier loads than bearings with comparable-sized ball bearings because the cylindrical shape of the rollers provides more surface area for distributing the load and it has a larger roller set than the standard roller design. This cylindrical roller bearing can be used to a maximum operating temperature of 120°C(248°F). The inner and outer rings and cylindrical rollers are made from a low-alloy, through-hardened chromium steel for durability, heat tolerance and resistance to deformity under heavy loads. The bearing is non-locating, with two ribs on the interior circumference of the outer ring and no ribs on the exterior circumference of the inner ring, to allow the outer and inner rings to axially displace relative to each other from the central position. The glass fibre reinforced polyamide (PA66) cage prevents the rollers from coming into contact with each other during use to reduce friction, vibrations and noise and it weighs less and is quieter than cages made from brass. A removable inner ring in the open bearing allows for lubrication. This cylindrical bearing is used in a broad range of applications where high radial loads are present.
Features and Benefits
• Accommodates heavy radial loads, rapid accelerations and high-speed
• Combines the high load carrying capacity of a full complement bearing with the high-speed capability of a bearing with cage
• Low friction and allows high-speed applications
• Can be easily mounted and dismounted
• Enhanced operational reliability
• Long service life
• High stiffness
• Combines the high load carrying capacity of a full complement bearing with the high-speed capability of a bearing with cage
• Low friction and allows high-speed applications
• Can be easily mounted and dismounted
• Enhanced operational reliability
• Long service life
• High stiffness
속성 | 값 |
---|---|
Inside Diameter | 20mm |
Outside Diameter | 47mm |
Roller Bearing Type | Cylindrical |
Race Width | 14mm |
Bore Type | Parallel |
Static Load Rating | 24700N |
Number of Rows | 1 |
Dynamic Load Rating | 32500N |
End Type | Open |
Limiting Speed | 19200rpm |
Reference Speed | 12800rpm |
Fatigue Limit Load | 2900N |