INA HK3520-B 35 mm ID Roller Bearing Drawn Cup Needle, 42 mm OD
- RS 제품 번호:
- 137-1771
- 제조사 부품 번호:
- HK3520-B
- 제조업체:
- INA
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩22,308.00
재고있음
- 3 개 단위 배송 준비 완료
- 추가로 2026년 6월 16일 부터 50 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 12 | ₩22,308.00 |
| 13 - 24 | ₩21,430.50 |
| 25 + | ₩20,982.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 137-1771
- 제조사 부품 번호:
- HK3520-B
- 제조업체:
- INA
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 35mm | |
| Race Width | 20mm | |
| Bore Type | Parallel | |
| Cage Material | Sheet Steel | |
| Maximum Speed - Grease | 4500rpm | |
| Static Load Rating | 46000N | |
| Maximum Speed - Oil | 7500rpm | |
| Outside Diameter | 42mm | |
| Number of Rows | 1 | |
| Limiting Speed | 7500rpm | |
| Standards/Approvals | No | |
| End Type | Open | |
| Dynamic Load Rating | 23800N | |
| Bearing Type | Drawn Cup Needle | |
| 모두 선택 | ||
|---|---|---|
브랜드 INA | ||
Product Type Roller Bearing | ||
Inside Diameter 35mm | ||
Race Width 20mm | ||
Bore Type Parallel | ||
Cage Material Sheet Steel | ||
Maximum Speed - Grease 4500rpm | ||
Static Load Rating 46000N | ||
Maximum Speed - Oil 7500rpm | ||
Outside Diameter 42mm | ||
Number of Rows 1 | ||
Limiting Speed 7500rpm | ||
Standards/Approvals No | ||
End Type Open | ||
Dynamic Load Rating 23800N | ||
Bearing Type Drawn Cup Needle | ||
- COO (Country of Origin):
- DE
Drawn Cup Needle Roller Bearings
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit.;Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.
Features and Benefits
• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise
Product Application Information
These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity.;Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.
Suffixes
2RS - Contact seals on both sides;RS - Contact seal on one side;ZW - Double row design, with lubrication hole
INA
관련된 링크들
- INA HK3520-2RS-L271 35 mm ID Roller Bearing Drawn Cup Needle, 42 mm OD
- NTN HK3520 35 mm ID Needle Roller Thrust Bearing Drawn Cup Needle Roller, 42 mm OD
- NTN HK3520D 35 mm ID Needle Roller Thrust Bearing Drawn Cup Needle Roller, 42 mm OD
- NTN HK3520LL/3AS 35 mm ID Needle Roller Thrust Bearing Drawn Cup Needle Roller, 42 mm OD
- INA HK3516-B 35 mm ID Roller Bearing Drawn Cup Needle, 42 mm OD
- INA HK3512-B 35 mm ID Roller Bearing Drawn Cup Needle, 42 mm OD
- INA HK3516-2RS-L271 35 mm ID Roller Bearing Drawn Cup Needle, 42 mm OD
- INA HK2526 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD