INA HK1812-B 18 mm ID Roller Bearing Drawn Cup Needle, 24 mm OD
- RS 제품 번호:
- 137-1749
- 제조사 부품 번호:
- HK1812-B
- 제조업체:
- INA
대량 구매 할인 받기
13개 더 담고 3% 할인 받기
View bulk pricing optionsSubtotal (1 unit)*
₩12,080.00
재고있음
- 10 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 절감 |
|---|---|---|
| 1 - 12 | ₩12,080.00 | - |
| 13 - 24 | ₩11,600.00 | 3% |
| 25 + | ₩11,340.00 | 6% |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 137-1749
- 제조사 부품 번호:
- HK1812-B
- 제조업체:
- INA
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 18mm | |
| Race Width | 12mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| Dynamic Load Rating | 8100N | |
| End Type | Open | |
| Static Load Rating | 10900N | |
| Maximum Speed - Grease | 8400rpm | |
| Number of Rows | 1 | |
| Outside Diameter | 24mm | |
| Maximum Speed - Oil | 14000rpm | |
| Standards/Approvals | No | |
| Limiting Speed | 14000rpm | |
| Bearing Type | Drawn Cup Needle | |
| 모두 선택 | ||
|---|---|---|
브랜드 INA | ||
Product Type Roller Bearing | ||
Inside Diameter 18mm | ||
Race Width 12mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
Dynamic Load Rating 8100N | ||
End Type Open | ||
Static Load Rating 10900N | ||
Maximum Speed - Grease 8400rpm | ||
Number of Rows 1 | ||
Outside Diameter 24mm | ||
Maximum Speed - Oil 14000rpm | ||
Standards/Approvals No | ||
Limiting Speed 14000rpm | ||
Bearing Type Drawn Cup Needle | ||
Schaeffler Roller Bearing, 18mm Bore, 24mm Outside Diameter - HK1812-B
This roller bearing is a drawn cup needle type designed to support radial loads in confined assemblies. It features a parallel bore and an open end, enabling straightforward installation where space is limited and a slim cross-section is required. The component is suited to applications demanding Compact rolling elements and predictable operating behaviour at elevated rotational speeds.
Features and Benefits:
• Limiting speed 14,000r/min provides high-speed operation capability
• Dynamic load capacity 8,100N increases service life under varying loads
• Static load 10,900N resists deformation during heavy static loading
• Open-end design simplifies insertion and lubrication access
• Parallel bore enables secure, concentric mounting in housings
• Dynamic load capacity 8,100N increases service life under varying loads
• Static load 10,900N resists deformation during heavy static loading
• Open-end design simplifies insertion and lubrication access
• Parallel bore enables secure, concentric mounting in housings
Applications
• Suitable for transmissions with Compact radial clearances
• Ideal for precision gearboxes requiring high rotational speed
• Used with sliding shafts in Compact actuator assemblies
• Can be used for lightweight automotive subassemblies
• Appropriate for industrial equipment needing thin-section bearings
• Ideal for precision gearboxes requiring high rotational speed
• Used with sliding shafts in Compact actuator assemblies
• Can be used for lightweight automotive subassemblies
• Appropriate for industrial equipment needing thin-section bearings
What is the maximum grease-lubricated rotational speed?
The grease maximum speed is 8,400r/min based on internal limiting conditions.
How does the bore configuration affect mounting?
The parallel bore provides a consistent inner diameter for press-fit or slip-fit installation, ensuring concentric support.
What load behaviour should be expected under static conditions?
The static load rating of 10,900N indicates resistance to permanent deformation when subjected to stationary loads.
How does the bearing handle high-speed applications?
The limiting speed of 14,000r/min defines the upper rotational boundary for oil-lubricated operation to maintain functional integrity.
What advantage does the open end provide for serviceability?
The open end allows easier access for lubrication replenishment and Visual inspection without disassembly.
관련된 링크들
- NTN HK1812FM 18 mm ID Needle Roller Thrust Bearing Drawn Cup Needle Roller, 24 mm OD
- INA HK5020 50 mm ID Roller Bearing Drawn Cup Needle, 58 mm OD
- INA HK3224 32 mm ID Roller Bearing Drawn Cup Needle, 39 mm OD
- INA HK2526 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD
- INA HK6012 60 mm ID Roller Bearing Drawn Cup Needle, 68 mm OD
- INA HK6020 60 mm ID Roller Bearing Drawn Cup Needle, 68 mm OD
- INA HK3026 30 mm ID Roller Bearing Drawn Cup Needle, 37 mm OD
- INA HK6032 60 mm ID Roller Bearing Drawn Cup Needle, 68 mm OD
