INA HK1712-B 17 mm ID Roller Bearing Drawn Cup Needle, 23 mm OD
- RS 제품 번호:
- 137-1748
- 제조사 부품 번호:
- HK1712-B
- 제조업체:
- INA
대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal (1 unit)*
₩11,602.50
재고있음
- 39 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 12 | ₩11,602.50 |
| 13 - 24 | ₩11,154.00 |
| 25 + | ₩10,900.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 137-1748
- 제조사 부품 번호:
- HK1712-B
- 제조업체:
- INA
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 17mm | |
| Race Width | 12mm | |
| Bore Type | Parallel | |
| Cage Material | Sheet Steel | |
| Standards/Approvals | DIN 618/ISO 3245 | |
| Series | HK | |
| Limiting Speed | 14700rpm | |
| Outside Diameter | 23mm | |
| Maximum Speed - Oil | 14700rpm | |
| Static Load Rating | 10300N | |
| End Type | Open | |
| Dynamic Load Rating | 7900N | |
| Number of Rows | 1 | |
| Maximum Speed - Grease | 8800rpm | |
| Bearing Type | Drawn Cup Needle | |
| 모두 선택 | ||
|---|---|---|
브랜드 INA | ||
Product Type Roller Bearing | ||
Inside Diameter 17mm | ||
Race Width 12mm | ||
Bore Type Parallel | ||
Cage Material Sheet Steel | ||
Standards/Approvals DIN 618/ISO 3245 | ||
Series HK | ||
Limiting Speed 14700rpm | ||
Outside Diameter 23mm | ||
Maximum Speed - Oil 14700rpm | ||
Static Load Rating 10300N | ||
End Type Open | ||
Dynamic Load Rating 7900N | ||
Number of Rows 1 | ||
Maximum Speed - Grease 8800rpm | ||
Bearing Type Drawn Cup Needle | ||
Drawn Cup Needle Roller Bearings
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit.;Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.
Features and Benefits
• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise
Product Application Information
These bearings allow the design of Compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity.;Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.
Suffixes
2RS - Contact Seals on both sides;RS - Contact seal on one side;ZW - Double row design, with lubrication hole
INA
관련된 링크들
- NTN HK1712FM 17 mm ID Needle Roller Thrust Bearing Needle Roller, Drawn Cup, 23 mm OD
- INA HK3026 30 mm ID Roller Bearing Drawn Cup Needle, 37 mm OD
- INA HK2526 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD
- INA HK5025 50 mm ID Roller Bearing Drawn Cup Needle, 58 mm OD
- INA HK3224 32 mm ID Roller Bearing Drawn Cup Needle, 39 mm OD
- INA HK5020 50 mm ID Roller Bearing Drawn Cup Needle, 58 mm OD
- INA HK5528 55 mm ID Roller Bearing Drawn Cup Needle, 63 mm OD
- INA HK6012 60 mm ID Roller Bearing Drawn Cup Needle, 68 mm OD