Subtotal (1 pack of 10 units)*
₩565,597.50
재고있음
- 4 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
팩 | 한팩당 | 한팩당* |
|---|---|---|
| 1 + | ₩565,597.50 | ₩56,559.75 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 588-332
- 제조사 부품 번호:
- SAKAC 8 M
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Connection Size | M8 | |
| Product Type | Rod End | |
| Material | Steel | |
| Dynamic Load Rating | 7.2kN | |
| Thread Standard | Metric | |
| Static Load Rating | 8kN | |
| Overall Width | 9.5mm | |
| Standards/Approvals | RoHS | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Connection Size M8 | ||
Product Type Rod End | ||
Material Steel | ||
Dynamic Load Rating 7.2kN | ||
Thread Standard Metric | ||
Static Load Rating 8kN | ||
Overall Width 9.5mm | ||
Standards/Approvals RoHS | ||
- COO (Country of Origin):
- DE
SKF Rod End, 8mm Bore Size, M8 Connection Size - SAKAC 8 M
This rod end provides a Compact articulating joint for linkage and pivot applications in industrial systems. It is designed to connect moving parts where angular misalignment occurs and to transfer loads in mechanical assemblies used across automation, electrical and electronic equipment.
Features and Benefits:
• 7.2 kN dynamic load rating increases fatigue life in cyclic use
• 8 kN static load rating supports high static loads securely
• 8mm bore for Compact shaft integration in confined spaces
• M8 metric thread enables direct compatibility with standard fastenings
• 8 kN static load rating supports high static loads securely
• 8mm bore for Compact shaft integration in confined spaces
• M8 metric thread enables direct compatibility with standard fastenings
Applications
• Suitable for motion-control linkages in automation equipment
• Ideal for pivot joints in electrical actuator mechanisms
• Used with Compact mechanical assemblies in electronics enclosures
• Can be used for load-transfer links in test rigs and fixtures
• Ideal for pivot joints in electrical actuator mechanisms
• Used with Compact mechanical assemblies in electronics enclosures
• Can be used for load-transfer links in test rigs and fixtures
What material characteristics affect service wear in bearing contact?
The component is formed from steel, providing a hard, wear-resistant surface that sustains sliding contact under repetitive articulation.
How should one select this item for a load-critical mounting?
Compare the expected Peak static loads to the 8 kN static capacity and ensure dynamic service loads do not exceed 7.2 kN to maintain operational safety margins.
What thread compatibility considerations apply when integrating into assemblies?
The threaded connection follows metric M8 standard dimensions, allowing mating with commonly available metric fasteners and nuts sized for M8 engagement.
Are there any size constraints to consider for tight installations?
The overall width is 9.5mm and the outside diameter measures 25mm, so allow for these envelope dimensions when planning clearances.
관련된 링크들
- SKF M6 Steel Rod End Metric, 6 mm Bore
- SKF M5 Steel Rod End Metric, 5 mm Bore
- SKF M12 Male Steel Rod End Metric, 12 mm Bore
- SKF M14 Male Steel Rod End Metric, 14 mm Bore
- SKF M10 Male Steel Rod End Metric, 10 mm Bore
- SKF M16 Male Steel Rod End Metric, 16 mm Bore
- SKF M30 x 2 Steel Rod End Metric, 30 mm Bore
- SKF M24 x 2 Male Steel Rod End Metric, 25 mm Bore