Keysight Technologies RF Switch, SMA Female Connector SPDT, 2 GHz Max, 60 dB Isolation, 15 ms, 50Ω Output

Subtotal (1 unit)*

₩1,939,802.80

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 4월 14일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩1,939,802.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
224-0545
제조사 부품 번호:
N1810TL-020-124-201
제조업체:
Keysight Technologies
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Keysight Technologies

Product Type

RF Switch

Switching Speed

15ms

Port to Port Isolation

60dB

Maximum Insertion Loss

1.12dB

Contact Configuration

SPDT

Connector Type

SMA Female

Output Impedance

50Ω

Contact Current

300mA

Height

12.7mm

Minimum Operating Temperature

-25°C

Contact DC Voltage

15V dc

Length

55.78mm

Maximum Operating Temperature

75°C

Maximum Frequency

2GHz

Standards/Approvals

No

Series

N181x

Width

53.41 mm

Minimum Frequency

0Hz

Keysight Technologies RF Switch, 24V DC Coil Voltage Rating, 15ms Switching Time - N1810/1/2 Series - N1810TL-020-124-201


Tackle many circuit testing processes in a snap with this RF switch from Keysight Technologies. It lets you quickly and efficiently transmit high-frequency signals through your system. A long service life of two million switching cycles means you can count on it for the long haul. Thanks to a switching time of just 15ms, you get rapid-fire signal transmission. As this product supports a broad frequency range of DC to 26.5GHz, it's a flexible choice for many standard test systems.

• Port-to-port isolation of over 90dB to minimise the risk of EMI

• Coil voltage of 24V DC for use in low-power systems

• Compact dimensions of 52.2 (L) x 53.41 (W) x 12.7mm (D) to fit into tight spaces

• SPDT configuration lets you control up to two devices for versatility

Applications


• Laboratory testing

• Signal routing

• Telecommunications

The Keysight Technologies N1810TL is a single-pole double-throw switch available in the frequency range from DC to 26.5 GHz. The unused port is terminated 50 Ω, making it ideal for applications where port matching is required.

How do I connect this RF switch to my test system?


D subminiature 9 pin connectors or solder lug terminals

Standard or TTL or 5 V CMOS compatible drive

Optional position indicator

This unit comes pre-terminated with a standard nine-pin D-sub connector, so it plugs into standard equipment without the hassle of wiring.

Note

Manufacturer’s Warranty

관련된 링크들