제조사부품번호

Huber+Suhner 6820.17.A RF AttenuatorStraight 0.8 dBMaleFemale

RS 제품 번호:: 716-5097
Distrelec 제품 번호:: 302-47-142
제조사 부품 번호:: 6820.17.A
제조업체:: Huber+Suhner

Huber+Suhner 6820.17.A RF AttenuatorStraight 0.8 dBMaleFemale

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 unit)*

₩265,473.00

5 개 단위 배송 준비 완료
추가로 2026년 6월 23일 부터 38 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 14	₩265,473.00
15 - 49	₩257,517.00
50 - 99	₩252,369.00
100 - 249	₩244,257.00
250 +	₩239,304.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 716-5097
Distrelec 제품 번호:: 302-47-142
제조사 부품 번호:: 6820.17.A
제조업체:: Huber+Suhner

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Huber+Suhner
	Product Type	RF Attenuator
	Interface Type	N Plug to N Socket
	Impedance	50Ω
	Maximum Frequency	12.4GHz
	Body Plating	Sucoplate
	Contact Plating	Gold
	Contact Material	Brass
	Low Power	Yes
	Minimum Frequency	4GHz
	Maximum Attenuation	0.8dB
	Minimum Operating Temperature	-55°C
	Connector Type	Type N
	Orientation	Straight
	Connector Gender A	Male
	Maximum Operating Temperature	130°C
	Standards/Approvals	No
	Connector Gender B	Female

	모두 선택
	브랜드 Huber+Suhner
	Product Type RF Attenuator
	Interface Type N Plug to N Socket
	Impedance 50Ω
	Maximum Frequency 12.4GHz
	Body Plating Sucoplate
	Contact Plating Gold
	Contact Material Brass
	Low Power Yes
	Minimum Frequency 4GHz
	Maximum Attenuation 0.8dB
	Minimum Operating Temperature -55°C
	Connector Type Type N
	Orientation Straight
	Connector Gender A Male
	Maximum Operating Temperature 130°C
	Standards/Approvals No
	Connector Gender B Female

RF ATTENUATOR: Type 6820.17.A Data Sheet

COO (Country of Origin):: CH

Huber+Suhner RF Attenuator, 0.8dB Maximum Attenuation, 12.4GHz Maximum Frequency - 6820.17.A

This RF attenuator is a low-power inline device designed to reduce signal amplitude in 50Ω systems while preserving impedance match across a wide frequency range. It connects directly between coaxial lines using a straight Type N male to Type N female Interface with gold-plated contacts, enabling insertion into test, measurement and signal-chain setups where controlled attenuation is required.

Features and Benefits:

• Maximum attenuation 0.8 dB provides minimal signal reduction for calibration
• Operates up to 12.4 GHz to support high-frequency measurements
• Temperature range -55°C to 130°C maintains performance in harsh environments
• Brass contacts with gold plating reduce contact loss and corrosion
• Sucoplate body finish increases mechanical durability of the housing

Applications

• Suitable for RF test benches and signal conditioning in laboratories
• Ideal for attenuation in communication component verification
• Used with coaxial measurement equipment requiring 50 Ω matching
• Can be used for amplitude control in automation and electronics rigs

What connector types are provided for inline connections?

The unit uses a Type N plug to Type N socket Interface allowing direct male-to-female coupling in 50 Ω coaxial lines.

How does the contact construction affect electrical performance?

Brass contacts with gold plating lower contact resistance and improve conductivity, reducing insertion loss at the connector interface.

What environmental extremes can it tolerate during operation?

It is specified to function between -55°C and 130°C, suitable for thermal cycling and elevated-temperature test conditions.

Is this suited for high-power transmission applications?

It is designated as a low-power attenuator, therefore it is not intended for high-power RF transmission duties.