Tektronix TCP300 Series TCP312A Oscilloscope Probe, Current Type, 100MHz, BNC Connector

The Tektronix TCP312A current oscilloscope probe offers current measurement capabilities of 30A DC continuous. The amplifier, when used with provides a wide range of current measurement capability and spans the gap between low-level milliamp measurements to very high current levels. This oscilloscope onscreen readout of magnitude and amps reduces measurement errors with no more hand calculations.
Note:
Requires TCPA300 amplifier available separately (RS 764-4391)

Bandwidth is DC to 100MHz
Lowest measurable current is 1mA
AC/DC input coupling
Insertion impedance is 0.7ohm at 100MHz
Rise time ≤3.5 ns
Typically less than 1% DC gain error
Bare insulated maximum wire voltage is 150V CAT II and 300V CAT II
Low insertion impedance reduces device under test loading
Split-core construction allows easy circuit connection
Status indicators provide visual operating status and notification of potential error conditions - degauss, probe open, overload, not terminated into 50ohm
Low DC drift and noise allows improved low-level current measurements
Dimensions (LxWxH): 200x60x32 mm

Current probes are used to help determine how much current a circuit is using and they measure this by clamping around a current carrying conductor. They can be found in:
Development and analysis solutions for designers
Installers and service personnel in telecom data communication
Computers
Semiconductor power electronics environments

UL61010-2-032 approved
UL61010-1 approved
CAN/CSA C22.2 No 61010-1 certified
CAN/CSA C22.2 No 61010-2-032 certified
EN61010-1
EN61010-2-032
CAT II 150V
CAT II 300V

Probe ground lead
Instruction sheet
Certificate of traceable calibration