Tektronix TCP300 Series TCP305A Oscilloscope Probe, Current Type, 50 MHz, BNC Connector
- RS 제품 번호:
- 781-0810
- Distrelec 제품 번호:
- 110-48-254
- 제조사 부품 번호:
- TCP305A
- 제조업체:
- Tektronix
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
Subtotal (1 unit)*
₩8,247,700.00
재고있음
- 추가로 2026년 11월 23일 부터 2 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩8,247,700.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 781-0810
- Distrelec 제품 번호:
- 110-48-254
- 제조사 부품 번호:
- TCP305A
- 제조업체:
- Tektronix
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Tektronix | |
| Product Type | Oscilloscope Probe | |
| Probe Type | Current | |
| Bandwidth | 50MHz | |
| Connector Type | BNC | |
| Model Number | TCP305A | |
| Number of Probes | 1 | |
| Safety Category Level | CAT II | |
| Safety Category Voltage | 300V | |
| Series | TCP300 | |
| Rise Time | 7ns | |
| Standards/Approvals | UL 610101, UL 610102032, EN 610101, CAN/CSA C22.2 No 610101, EN 610102032, CAN/CSA C22.2 No 610102032 | |
| 모두 선택 | ||
|---|---|---|
브랜드 Tektronix | ||
Product Type Oscilloscope Probe | ||
Probe Type Current | ||
Bandwidth 50MHz | ||
Connector Type BNC | ||
Model Number TCP305A | ||
Number of Probes 1 | ||
Safety Category Level CAT II | ||
Safety Category Voltage 300V | ||
Series TCP300 | ||
Rise Time 7ns | ||
Standards/Approvals UL 610101, UL 610102032, EN 610101, CAN/CSA C22.2 No 610101, EN 610102032, CAN/CSA C22.2 No 610102032 | ||
해당 안됨
- COO (Country of Origin):
- CN
Tektronix Oscilloscope Probes
The Tektronix current oscilloscope probe offers current measurement capabilities of 50DC continuous. The amplifier, when used with Tektronix provides a wide range of current measurement capability and spans the gap between low-level milliamp measurements to very high current levels. The oscilloscope onscreen readout of magnitude and amps reduces measurement errors with no more hand calculations.
Note:
Requires TCPA300 amplifier available separately
Features and Benefits
Bandwidth is DC to 50MHz
Lowest measurable current is 5mA
Insertion impedance is 0.35ohm at 50MHz
Rise time is 7ns
Typically less than 1% DC gain error
Bare insulated maximum wire voltage is 150V CAT II and 300V CAT II
Low insertion impedance reduces device under test loading
Split-core construction allows easy circuit connection
Status indicators provide Visual operating status and notification of potential error conditions - degauss, probe open, overload, not terminated into 50 ohm
Low DC drift and noise allows improved low level current measurements
Applications
Development and analysis solutions for designers
Installers and service personnel in telecom data communication
Computers
Semiconductor power electronics environments
Certifications
UL61010-2-032 approved
UL61010-1 approved
CAN/CSA C22.2 No 61010-1 certified
CAN/CSA C22.2 No 61010-2-032 certified
EN61010-1
EN61010-2-032
CAT II 150V
CAT II 300V
관련된 링크들
- Tektronix TCP300 Series TCP312A Oscilloscope Probe, Current Type, 100 MHz, BNC Connector
- Tektronix TCP Series TCP 303 Oscilloscope Probe, Current Type, 50, BNC Connector
- Tektronix TCP Series TCP0020 Oscilloscope Probe, Current Type, 50 MHz, BNC Connector
- Tektronix TCP Series TCP2020 Oscilloscope Probe, Current Type, 50 MHz, BNC Connector
- Tektronix TCP Series TCP0030A Oscilloscope Probe, Current Type, 120 MHz, BNC Connector
- Tektronix TCP 0150 Oscilloscope Probe, Current Type, 20 MHz
- Tektronix TCP404XL Oscilloscope Probe, AC/DC Type, 2 MHz, BNC Connector
- Tektronix TCPA400 Oscilloscope Probe, Current Type, 2 MHz, BNC Connector
