RS PRO Punch and Die Tool, 15.1 x 15.1mm, Square, Hand; Hydraulic Operation
- RS 제품 번호:
- 605-633
- 제조업체:
- RS PRO
사용할 수 없음
RS는 더 이상 이 제품을 입고하지 않습니다.
- RS 제품 번호:
- 605-633
- 제조업체:
- RS PRO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | RS PRO | |
| Cutting Capacity | Mild Steel: 1.6 mm; Aluminium: 2 mm | |
| Hole Shape | Square | |
| Hole Size | 15.1 x 15.1mm | |
| Operation | Hand; Hydraulic | |
| 모두 선택 | ||
|---|---|---|
브랜드 RS PRO | ||
Cutting Capacity Mild Steel: 1.6 mm; Aluminium: 2 mm | ||
Hole Shape Square | ||
Hole Size 15.1 x 15.1mm | ||
Operation Hand; Hydraulic | ||
- COO (Country of Origin):
- GB
Square, Rectangular and Radius Hole Cutters
Square, rectangular and radius (rounded corner) hole cutters suitable for use on mild steel (28 tons/in2 uts max) up to 1.6mm (16 swg) and aluminium up to 2mm (14 swg) except as marked * (in which case capacity is 18 swg/1.22mm mild steel)
Long life punches with minimum burr, distortion or surface damage
Easy to dismantle - slugs drop freely out of die
Most punches can be used with the hydraulic pump/cylinder Stock no 605-223 or hydraulic hand punch kit Stock no 388-3628 up to 35mm/1 1/4 in diameter (See comparison table for exceptions). Not suitable for lever presses
Ball race included
Easy to dismantle - slugs drop freely out of die
Most punches can be used with the hydraulic pump/cylinder Stock no 605-223 or hydraulic hand punch kit Stock no 388-3628 up to 35mm/1 1/4 in diameter (See comparison table for exceptions). Not suitable for lever presses
Ball race included
관련된 링크들
- RS PRO Punch and Die Tool, 32.5 x 32.5mm, Square, Hand; Hydraulic Operation
- RS PRO Punch and Die Tool, 40mm, Circular, Hand; Hydraulic Operation
- RS PRO Punch and Die Tool, 20mm, Circular, Hand; Hydraulic Operation
- RS PRO Punch and Die Tool, 30mm, Circular, Hand; Hydraulic Operation
- RS PRO Punch and Die Tool, 44.45mm, Circular, Hand; Hydraulic Operation
- Greenlee , 1 Piece Punch & Die Set, 15.1 x 15.1 mm, kit contents: Greenlee Punch and Die Tool, Square, Hydraulic, Hand
- RS PRO Punch and Die Tool, 45 x 45mm, Square, Hydraulic Operation
- Greenlee Punch & Die Combinations, 15.9 x 13mm, Rectangular, Hand; Hydraulic Operation