제조사부품번호

Honeywell Technologies HSCMRRD006MG2A3 Piezoresistive Pressure SensorBoard 8 SMT

RS 제품 번호:: 226-9684
제조사 부품 번호:: HSCMRRD006MG2A3
제조업체:: Honeywell Technologies

Honeywell Technologies HSCMRRD006MG2A3 Piezoresistive Pressure SensorBoard 8 SMT

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

현재 비가용

RS는 이 제품을 더 이상 판매하지 않습니다.

RS 제품 번호:: 226-9684
제조사 부품 번호:: HSCMRRD006MG2A3
제조업체:: Honeywell Technologies

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell Technologies
	Maximum Overload Pressure	67.5kPa
	Product Type	Piezoresistive Pressure Sensor
	Sensor Type	Piezoresistive Pressure Sensor
	Mount Type	Board
	Package Type	SMT
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	0.6 kPa
	Maximum Supply Voltage	5V
	Port Type	Dual Radial Barbed
	Accuracy	±0.25 %
	Maximum Operating Temperature	85°C
	Standards/Approvals	ISO 9001
	Width	13.3mm
	Series	HSC
	Length	10mm
	Height	13.75mm
	Minimum Operating Pressure	0mbar
	Automotive Standard	ISO 9001
	Minimum Operating Temperature	-20°C

	모두 선택
	브랜드 Honeywell Technologies
	Maximum Overload Pressure 67.5kPa
	Product Type Piezoresistive Pressure Sensor
	Sensor Type Piezoresistive Pressure Sensor
	Mount Type Board
	Package Type SMT
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 0.6 kPa
	Maximum Supply Voltage 5V
	Port Type Dual Radial Barbed
	Accuracy ±0.25 %
	Maximum Operating Temperature 85°C
	Standards/Approvals ISO 9001
	Width 13.3mm
	Series HSC
	Length 10mm
	Height 13.75mm
	Minimum Operating Pressure 0mbar
	Automotive Standard ISO 9001
	Minimum Operating Temperature -20°C

Datasheet - HSCMRRD006MG2A3

Honeywell HSC Series Piezoresistive Pressure Sensor, ±0.25% Accuracy, 0.6kPa Maximum Operating Pressure - HSCMRRD006MG2A3

This piezoresistive pressure sensor provides a calibrated, compensated output for measuring absolute, gage or differential pressures in board-mounted systems. It is designed for use with non-corrosive, non-ionic gases and offers ratiometric analogue or digital outputs while operating from a single 3.3V to 5V supply. The device is suited to Compact electronic assemblies where low power and high measurement fidelity across a standard temperature range are required.

Features and Benefits:

• ±0.25%FSS accuracy reduces software calibration overhead
• Calibrated output update rate up to 2kHz improves responsiveness
• Compensated over 0°C to 50°C for stable in-range performance
• Low power consumption under 10mW extends battery life
• Dual radial barbed port sensor option simplifies fluid connections
• 67.5kPa overload protection sensor supports occasional overpressure

Applications

• Suitable for ventilators and respiratory monitoring equipment
• Ideal for HVAC filter clogging and air-quality detection systems
• Used with laboratory gas-flow and chromatography analysers
• Can be used for portable airflow monitors and spirometers
• Suitable for industrial pneumatic control and flow calibration

What supply voltages does it accept?

It operates from a single supply of either 3.3V or 5.0V.

How does the sensor handle temperature-related errors?

An on-board ASIC provides calibration and temperature compensation for offset, sensitivity and non-linearity within the compensated range.

What media are supported on the pressure ports?

It is intended for non-corrosive, non-ionic gases, liquid-media options exist for ranges ≥40mbar applied to Port1 only.

How fast is the device output for analogue and digital interfaces?

Calibrated output updates near 1kHz for analogue and approximately 2kHz for digital.

What environmental operating limits apply?

The operating temperature range extends from -20°C to 85°C and storage is rated to -40°C to 85°C.