제조사부품번호

Honeywell HSCDANV001BAAA5 Piezoresistive Pressure SensorThrough Hole 8 DIP

RS 제품 번호:: 226-9651
제조사 부품 번호:: HSCDANV001BAAA5
제조업체:: Honeywell

Honeywell HSCDANV001BAAA5 Piezoresistive Pressure SensorThrough Hole 8 DIP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩153,784.00

재고있음

142 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 9	₩153,784.00
10 - 24	₩149,930.00
25 - 49	₩146,207.60
50 +	₩142,541.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 226-9651
제조사 부품 번호:: HSCDANV001BAAA5
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Product Type	Piezoresistive Pressure Sensor
	Maximum Overload Pressure	200kPa
	Sensor Type	Piezoresistive Pressure Sensor
	Mount Type	Through Hole
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	100 kPa
	Port Type	Single Axial Barbed
	Accuracy	±0.25 %
	Maximum Supply Voltage	5V
	Maximum Operating Temperature	85°C
	Standards/Approvals	No
	Series	HSC
	Length	10mm
	Height	13.75mm
	Width	13.3 mm
	Minimum Operating Pressure	0mbar
	Minimum Operating Temperature	-20°C
	Automotive Standard	No

	모두 선택
	브랜드 Honeywell
	Product Type Piezoresistive Pressure Sensor
	Maximum Overload Pressure 200kPa
	Sensor Type Piezoresistive Pressure Sensor
	Mount Type Through Hole
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 100 kPa
	Port Type Single Axial Barbed
	Accuracy ±0.25 %
	Maximum Supply Voltage 5V
	Maximum Operating Temperature 85°C
	Standards/Approvals No
	Series HSC
	Length 10mm
	Height 13.75mm
	Width 13.3 mm
	Minimum Operating Pressure 0mbar
	Minimum Operating Temperature -20°C
	Automotive Standard No

Datasheet - HSCDANV001BAAA5

The Honeywell HSC series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. The HSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and non linearity using an on board Application Specific Integrated Circuit. The sensor is characterized for operation from a single power supply of either 3.3 Vdc or 5.0 Vdc.

Promotes system reliability and reduces potential system downtime

Allows ultra low pressure sensors to be used continuously well above the calibrated pressure range

Detects most internal failures including burst sensors

Enables extended battery life

Honeywell HSCDANV001BAAA5 Piezoresistive Pressure SensorThrough Hole 8 DIP

관련된 링크들