Honeywell Technologies Absolute Pressure SensorBoard 8 DIP

RS 제품 번호:: 214-1441
제조사 부품 번호:: HSCDANN015PA2A3
제조업체:: Honeywell

Honeywell Technologies Absolute Pressure SensorBoard 8 DIP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 unit)*

₩81,800.00

일시적 품절

2026년 11월 30일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 12	₩81,800.00
13 - 24	₩80,000.00
25 +	₩78,280.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 214-1441
제조사 부품 번호:: HSCDANN015PA2A3
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Sensor Type	Absolute Pressure Sensor
	Maximum Overload Pressure	30psi
	Product Type	Absolute Pressure Sensor
	Mount Type	Board
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	15 psi
	Maximum Supply Voltage	6V
	Port Type	Single Axial Barbed
	Accuracy	±0.25 %
	Maximum Operating Temperature	85°C
	Length	10mm
	Height	13.75mm
	Width	13.3mm
	Series	HSC
	Standards/Approvals	ISO 9001
	Minimum Operating Pressure	0psi
	Minimum Operating Temperature	-40°C
	Automotive Standard	ISO 9001

	모두 선택
	브랜드 Honeywell
	Sensor Type Absolute Pressure Sensor
	Maximum Overload Pressure 30psi
	Product Type Absolute Pressure Sensor
	Mount Type Board
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 15 psi
	Maximum Supply Voltage 6V
	Port Type Single Axial Barbed
	Accuracy ±0.25 %
	Maximum Operating Temperature 85°C
	Length 10mm
	Height 13.75mm
	Width 13.3mm
	Series HSC
	Standards/Approvals ISO 9001
	Minimum Operating Pressure 0psi
	Minimum Operating Temperature -40°C
	Automotive Standard ISO 9001

Honeywell HSC Series Absolute Pressure Sensor, 15psi Maximum Operating Pressure, ±0.25% Accuracy - HSCDANN015PA2A3

This absolute pressure sensor measures absolute pressure using an internal vacuum reference and provides a calibrated, temperature‑compensated output for use with non‑corrosive, non‑ionic gases in board‑mounted electronic systems. It operates from a low‑voltage supply and is intended for miniature applications where an amplified or digital, ratiometric signal is required for integration with microcontrollers and data acquisition hardware.

Features and Benefits:

• ±0.25% accuracy reduces software correction requirements
• 3.3V supply compatibility enables low‑voltage system integration
• 8‑pin DIP package allows straightforward through‑hole mounting
• Calibrated and temperature compensated for 0°C-50°C operation
• Single axial barbed port simplifies pneumatic connection to tubing
• Low power consumption (<10mW typical) supports battery operation

Applications

• Suitable for ventilator and respiratory monitoring systems
• Ideal for HVAC filter clog detection and VAV control
• Used with gas chromatography and flow instrumentation
• Can be used for oxygen concentrator pressure monitoring
• Suitable for barometry and ambient absolute pressure measurement

What supply voltages can it accept?

It is characterised for use from a single supply of either 3.3V or 5.0V and will operate within specified limits up to 6V.

What environmental temperature range does it tolerate during operation?

The device will operate over −40 to 85°C and is characterised for compensated performance across 0°C to 50°C.

Which output interfaces are available for direct microcontroller connection?

Outputs include a ratiometric analogue signal or digital interfaces compatible with I2C or SPI allowing direct microprocessor interfacing.

How is long‑term accuracy and interchangeability achieved?

Each sensor is fully calibrated and compensated on‑board using an ASIC, providing tight part‑to‑part accuracy and industry‑leading stability.

What media are permitted at the pressure port?

It is intended for non‑corrosive, non‑ionic gases, liquid‑media options are restricted to specific pressure ranges and require Port 1 only.