제조사부품번호

Honeywell Gauge Pressure SensorSurface 8 DIP

RS 제품 번호:: 211-9918
제조사 부품 번호:: HSCDLNN060MGAA5
제조업체:: Honeywell

Honeywell Gauge Pressure SensorSurface 8 DIP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 Box of 50 units)*

₩3,396,878.00

재고있음

50 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	Per Box*
50 - 50	₩67,937.56	₩3,396,878.00
100 - 150	₩66,578.32	₩3,328,934.80
200 +	₩65,247.28	₩3,262,364.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 211-9918
제조사 부품 번호:: HSCDLNN060MGAA5
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Maximum Overload Pressure	85kPa
	Product Type	Gauge Pressure Sensor
	Sensor Type	Gauge Pressure Sensor
	Mount Type	Surface
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	6000 kPa
	Maximum Supply Voltage	5V
	Port Type	Single Axial Barbless
	Accuracy	±0.25 %
	Maximum Operating Temperature	85°C
	Height	13.75mm
	Series	HSC
	Standards/Approvals	No
	Width	13.3 mm
	Length	10mm
	Minimum Operating Pressure	0mbar
	Automotive Standard	No
	Minimum Operating Temperature	-20°C

	모두 선택
	브랜드 Honeywell
	Maximum Overload Pressure 85kPa
	Product Type Gauge Pressure Sensor
	Sensor Type Gauge Pressure Sensor
	Mount Type Surface
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 6000 kPa
	Maximum Supply Voltage 5V
	Port Type Single Axial Barbless
	Accuracy ±0.25 %
	Maximum Operating Temperature 85°C
	Height 13.75mm
	Series HSC
	Standards/Approvals No
	Width 13.3 mm
	Length 10mm
	Minimum Operating Pressure 0mbar
	Automotive Standard No
	Minimum Operating Temperature -20°C

Datasheet - HSCDLNN060MGAA5

The Honeywell TruStability High Accuracy Silicon Ceramic (HSC) Series is a piezo resistive silicon pressure sensor offering a ratio metric analogue or digital output for reading pressure over the specified full scale pressure span and temperature range. The HSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and nonlinearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz for analogue and 2 kHz for digital.

Stability and reliability

Industry-leading accuracy of ±0.25 %FSS BFSL

Port and housing options simplify integration

Wide pressure range, from ±1.6 mbar to ±10 bar | ±160 Pa to ±1 MPa | ±0.5 inH2 O to ±150 psi

Small package size

Extremely low power consumption

Honeywell Gauge Pressure SensorSurface 8 DIP

관련된 링크들