STMicroelectronics LPS22HBTR MEMS Pressure SensorSurface 10 HLGA
- RS 제품 번호:
- 111-6455
- 제조사 부품 번호:
- LPS22HBTR
- 제조업체:
- STMicroelectronics
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
현재 비가용
죄송합니다. 언제 재입고될지 모릅니다.
- RS 제품 번호:
- 111-6455
- 제조사 부품 번호:
- LPS22HBTR
- 제조업체:
- STMicroelectronics
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | STMicroelectronics | |
| Maximum Overload Pressure | 2000kPa | |
| Product Type | MEMS Pressure Sensor | |
| Sensor Type | Absolute Pressure Sensor | |
| Mount Type | Surface | |
| Package Type | HLGA | |
| Pin Count | 10 | |
| Minimum Supply Voltage | 1.7V | |
| Maximum Operating Pressure | 126 kPa | |
| Maximum Supply Voltage | 3.6V | |
| Accuracy | ±0.1 hPa | |
| Maximum Operating Temperature | 85°C | |
| Series | LPS22HB | |
| Standards/Approvals | ECOPACK lead-free | |
| Length | 2mm | |
| Height | 0.76mm | |
| Maximum Output Voltage | 6.7V | |
| Width | 2 mm | |
| Minimum Operating Pressure | 26kPa | |
| Minimum Operating Temperature | -40°C | |
| Automotive Standard | No | |
| Minimum Output Voltage | 5.7V | |
| 모두 선택 | ||
|---|---|---|
브랜드 STMicroelectronics | ||
Maximum Overload Pressure 2000kPa | ||
Product Type MEMS Pressure Sensor | ||
Sensor Type Absolute Pressure Sensor | ||
Mount Type Surface | ||
Package Type HLGA | ||
Pin Count 10 | ||
Minimum Supply Voltage 1.7V | ||
Maximum Operating Pressure 126 kPa | ||
Maximum Supply Voltage 3.6V | ||
Accuracy ±0.1 hPa | ||
Maximum Operating Temperature 85°C | ||
Series LPS22HB | ||
Standards/Approvals ECOPACK lead-free | ||
Length 2mm | ||
Height 0.76mm | ||
Maximum Output Voltage 6.7V | ||
Width 2 mm | ||
Minimum Operating Pressure 26kPa | ||
Minimum Operating Temperature -40°C | ||
Automotive Standard No | ||
Minimum Output Voltage 5.7V | ||
MEMS Pressure Sensor: Digital Barometer, STMicroelectronics
This is an ultra-compact absolute piezo-resistive pressure sensor with a high-resolution sensing element and embedded temperature compensation. Digital pressure, temperature data and register control communication is through the SPI and I²C interfaces. The pressure sensors are designed with STs VENSENS technology allowing the fabrication of pressure sensor on a monolithic silicon chip. This will eliminate wafer-to-wafer bonding and maximise reliability.
These pressure sensors use innovative MEMS (Micro Electro-Mechanical Systems) to provide an extremely high pressure resolution in an ultra-compact and thin package. Pressure sensors are becoming increasingly used in tablets, smartphones, and wearable technology. With them becoming increasingly popular in smartphones, it opens the door to new applications such as weather analysers, health and sports monitors.
• Key technical features –
• Enhanced temperature compensation
• Absolute pressure range from 260 to 1260 hPa
• Lower power consumption, less the 4μA
• Pressure noise lower than 1Pa RMS
• Embedded FIFO
Pressure Sensors, STMicroelectronics
관련된 링크들
- STMicroelectronics LPS25HBTR MEMS Pressure SensorSurface 10 HLGA
- STMicroelectronics MEMS Pressure SensorSurface 10 HLGA
- STMicroelectronics LPS22CHTR MEMS Pressure SensorSurface 10 HLGA-10L
- STMicroelectronics LPS22HHTR Absolute Pressure SensorSurface 10 HLGA
- STMicroelectronics Absolute Pressure SensorSurface 10 HLGA
- STMicroelectronics LPS27HHWTR Absolute Pressure SensorSurface 10 CCLGA
- STMicroelectronics LPS27HHTWTR Barometric Pressure SensorSurface 10 CCLGA
- STMicroelectronics LPS33HWTR Absolute Pressure SensorSurface 10 CCLGA
