STMicroelectronics VND600SPTR-E High Side, High Side Power Switch IC 10-Pin, PowerSO-10
- RS 제품 번호:
- 233-3121
- 제조사 부품 번호:
- VND600SPTR-E
- 제조업체:
- STMicroelectronics
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩14,976.00
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 1 - 9 | ₩14,976.00 |
| 10 - 99 | ₩14,664.00 |
| 100 - 249 | ₩14,371.50 |
| 250 - 499 | ₩14,098.50 |
| 500 + | ₩13,806.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 233-3121
- 제조사 부품 번호:
- VND600SPTR-E
- 제조업체:
- STMicroelectronics
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | STMicroelectronics | |
| Power Switch Type | High Side | |
| Power Switch Topology | High Side | |
| Product Type | Power Switch IC | |
| Number of Outputs | 2 | |
| Package Type | PowerSO-10 | |
| Pin Count | 10 | |
| 모두 선택 | ||
|---|---|---|
브랜드 STMicroelectronics | ||
Power Switch Type High Side | ||
Power Switch Topology High Side | ||
Product Type Power Switch IC | ||
Number of Outputs 2 | ||
Package Type PowerSO-10 | ||
Pin Count 10 | ||
The STMicroelectronics VND600SP-E is a monolithic device MADE using STMicroelectronics™ VI Power™ M0-3 technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCCpin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). This device has two channels in high-side configuration; each channel has an analog sense output on which the sensing current is proportional (according to a known ratio) to the corresponding load current. Built-in thermal shutdown and outputs current limitation protect the chip from over temperature and short circuit. Device turns-off in case of ground pin disconnections.
ECOPACK®: lead free and RoHS compliant
Automotive Grade: compliance with AEC Guidelines
Very low standby current
CMOS compatible input
Proportional load current sense
Current sense disable
Thermal shutdown protection and diagnosis
Under voltage shutdown
Overvoltage clamp
Load current limitation